I have read a few threads on the matter and tried quite a few things

Mavic 2 Latest formware won't go past 99%

Using app, software version not recognized

Used an older DJI assist version to try a factory reset, which isn;t available on DJI Assist 2 for Mavic 2 Pro - neither worked

Tried unplugging at 99%, resetting - nothing works

Drone connects to controller, no video stream, camera responds to controls and has IMU error. tried recalibrating IMU, doesn't complete


Any ideas?

Hello there alancabroaviation.co.uk. I am sorry for the trouble this has caused and thank you for reaching out. Can please try to download the firmware once again using this link ( https://www.dji.com/mavic-2/info#downloads ) and try to update the said drone once again to see id the issue will still persist and for us to be able to isolate the said issue. Thank you.

Exactly same

Using the DJI assist 2 (I assume this is what you wanted me to download)  from the link, this does exactly the same. stops at 99% and does nothing further until i unplug Mavic 2 pro or pull cable. When i do this is says update failed

Hi, I have the same problem for the firmware.