Hi!

I unpacked my new P3 professional, updated the firmware to v1.2.6 (RC and bird successful). I started the RC and drone at home to learn the DJI Pilot app.

After about ten minutes I saw, that the gimbal started to roll fast to 20 ° and then slowly rotated back to the horizontal position. The drone was standing on a table, the camera pointed to a stable Background.

I started to calibrate the gimbal with the DJI Pilot app but after 5 minutes there was the same movement.

This also happens outside when flying! After 10 minutes the gimbal starts to rotate without reason.

It makes no difference if I choose FPV or Following mode: The gimbal remains in the following mode!

Has anyone the same effect?

Best regards
Michael Raab (Austria)

Mine does the same except is starts rotating much quicker. I've been pushing for a replacement as the gimbal is obviously defective. All I'm being offered is a repair.

Have you calibrated the controller, especially the camera tilt dial?

mech@wispertel. Posted at 2015-7-6 21:21
Have you calibrated the controller, especially the camera tilt dial?

Thank you for your idea!
Yes, I have done the calibration.
DJI Europe told me either to send the drone to repair or wait for a new firmware. I decided to wait!