With the Spark, one has to quit recording before shutting off the Spark to avoid loss of recorded vid. Is it the same for Min and Mini 2?
Thanks

It might appear that way from what is written on page 26 of the manual:

"Make sure to power off the aircraft correctly. Otherwise, the camera parameters will not be saved and any recorded videos may be damaged. DJI is not responsible for any failure of an image or video to be recorded or having been recorded in a way that is not machine-readable."

If you switch off before stopping the video recording, the current file will not be finalised. But it only affects the current file. Solution is to leave the SD card in the aircraft and switch the aircraft on again. It will then repair the file.

It is definitely that way on the Mini.

Hi, stuka75. Thanks for reaching out! Yes, it'll follow the same logic.

As already been quoted by BumblerBee, please make sure to power off the aircraft correctly. Otherwise, the camera parameters will not be saved and any recorded videos may be damaged. DJI is not responsible for any failure of an image or video to be recorded or having been recorded in a way that is not machine-readable.

I think its the same on all the Mavics.