DadOf6
lvl.2
United States
Offline
|
Hi there,
Anyone else noticed the P2 doesn't like LED lighting if you are timelapsing? With plain video you can set the anti-flicker which seems to work fine. No such option for timelapse or motionlapse - the auto is the only option and it is grayed out. What this means is if you have LED lighting, the screen shows up like it is strobing, and the recording then has light and dark waves that run through it. It does not matter if you use the Mimo app or the P2 standalone. It is easier to see when using Mimo however.
I've got a short example - "flicker recording" is what I see on the Mimo app when this happens. "flicker final timelapse" is the result with the waves.
flicker recording - https://www.dropbox.com/s/wdcrq1 ... 0recording.mov?dl=0
flicker final timelapse - https://www.dropbox.com/s/lr32jz ... 0timelapse.mov?dl=0
Camera settings can be seen on the "flicker recording" video. I was using manual, but also occurs in auto. The video was at ISO Auto/400 Max, Shutter 1/160, 1080/30. Timelapse at 0.5s. Did not matter if I changed settings. Tried lower ISO (200), lower shutter (1/30), same issue. Though the lower shutter seemed to help with the waves in the recording.
I am running latest Mimo and P2 firmware. This problem has existed since I got the P2 in November. Any advice would be appreciated!
Thanks
|
|