I have an issue while trying to use the gimbal of my Matrice 300 RTK. I need to make a producedure to take a set of picture at different angles. For that I use the gimbal.rotate() with a rotation in absolute but when I do that and the drone is in the air it is the drone which rotate and not the gimbal. Where is the problem? The gimbal is set in FPV mode

Set gimbal to free

Yes but then the 0° is set to the north and not the aircraft face

djiuser_YDso2sK4VXB6 Posted at 1-27 05:29
Yes but then the 0° is set to the north and not the aircraft face

Yes. I think you can get the aircraft heading at the same time.

Yes but it's not precise then...

up, anyone having idea?

djiuser_YDso2sK4VXB6 Posted at 2-9 10:22
up, anyone having idea?

Since you don't give much info, I have to guess :-)

I've seen this behaivor on mavic 2 when in it's P-GPS-mode.

Enable virtualstick and you will get locked heading.

It seems to work but when the drone goes in WayPoint mission for example the problem get back :/

I had to modify the whole concept of the application to avoid this
But thanks