The windsock (deadcat) on my Pocket 2 wireless mic fits VERY loosely.
Anyone else with this issue and any possible fixes?

Thanks.

Have a look at this thread and see if you have the magnet https://forum.dji.com/forum.php?mod=viewthread&tid=229062

AlanHd Posted at 1-29 09:03
Have a look at this thread and see if you have the magnet https://forum.dji.com/forum.php?mod=viewthread&tid=229062

Thanks so much for that.  I perused that thread and YES, it seems I DO have the magnet, but it seems to be very weak.

AlanHd Posted at 1-29 09:03
Have a look at this thread and see if you have the magnet https://forum.dji.com/forum.php?mod=viewthread&tid=229062

I lost it on my first hike.  I’m waiting for a replacement ordered at dji support. Hope the new one stays on better or otherwise I will use some double sided tape as extra.

SWATBoss Posted at 2021-1-29 09:44
Thanks so much for that.  I perused that thread and YES, it seems I DO have the magnet, but it seems to be very weak.

I think my magnet was installed backwards. You probably had the same issue. I can't get it out of the deadcat. It was most likely glued in place.

My deadcat's magnet got loose and fell off. I tried putting it back (still not glueing it to see if it stays without it and to see which way it should be inserted for the proper grip) and noticed that it won't stay properly if inserted the wrong way around. Contacted DJI through warranty service and got a replacement.

If nothing else helps, try contacting them.