Phantom4 pro, Mavic2 Series

After setting the panorama, the command to take pictures is not working
Dji sdk -> startShootPhoto


However, when you press the shoot button on the controller, panorama shooting is performed.
-> djiError : Not Suppored


1. Is the action of the controller shooting button different from the action of (startShootPhoto)?


2. I want to know how to take a panorama

Do you set the shoot photo mode to PANORAMA. By the way Phantom 4 pro doesn't support Panorama Shoot

1. Phantom4 pro
      setShootPhotoMode ()-> resulte-> djiError : 카메라에 잘못된 매개 변수가 수신되었습니다.
      setShootPhotoMode ()

      setShootPhotoMode 실행시 오류가 발생합니다. 단, setPhotoPanoramaMode ()를 실행하면 파노라마 모드로 변경됩니다.
      setPhotoPanoramaMode (SettingsDefinitions.PhotoPanoramaMode.PANORAMA_MODE_SPHERE) -> resulte -> 성공 -> getShootPhotoMode : PANORAMA -> getPhotoPanoramaMode : PANORAMA_MODE_SPHERE

   DijSDK -> startShootPhoto () -> djiError :하지 Suppored
   RemoteController -> ShootPhoto 버튼을 눌러 -> 시작 파노라마


2. Mavic2 기업을
    setShootPhotoMode ()-> 결과-> 성공-> getShootPhotoMode : PANORAMA
   setPhotoPanoramaMode (SettingsDefinitions.PhotoPanoramaMode.PANORAMA_MODE_SPHERE)-> error-> djiError : 지원되지 않는 기능

   파노라마 모드가 설정되었지만 파노라마 유형을 알 수 없습니다. ??
        PANORAMA_MODE_3X1 (3),
        PANORAMA_MODE_3X3 (7),
        PANORAMA_MODE_1X3 (6),
        PANORAMA_MODE_SPHERE (8),
        PANORAMA_MODE_180 (9),
        PANORAMA_MODE_SUPER_RESOLUTION (10),
        UNKNOWN (255);   

kv886 Posted at 2-24 04:22
Do you set the shoot photo mode to PANORAMA. By the way Phantom 4 pro doesn't support Panorama Shoot

1. Phantom4 pro
      setShootPhotoMode() ->resulte -> djiError : Camera received invalid parameters
      setShootPhotoMode()

      An error occurs when executing setShootPhotoMode. However, if setPhotoPanoramaMode() is executed, it is changed to panorama mode.
      setPhotoPanoramaMode(SettingsDefinitions.PhotoPanoramaMode.PANORAMA_MODE_SPHERE) -> resulte  -> success -> getShootPhotoMode : PANORAMA -> getPhotoPanoramaMode : PANORAMA_MODE_SPHERE

   DijSDK -> startShootPhoto() -> djiError : Not Suppored
   RemoteController -> ShootPhoto Button Press -> panorama start


2. Mavic2 enterprise
    setShootPhotoMode() ->resulte -> success -> getShootPhotoMode : PANORAMA
   setPhotoPanoramaMode(SettingsDefinitions.PhotoPanoramaMode.PANORAMA_MODE_SPHERE) -> error -> djiError : The feature unsupported

   The panorama mode is set, but the panorama type is unknown. ??
        PANORAMA_MODE_3X1(3),
        PANORAMA_MODE_3X3(7),
        PANORAMA_MODE_1X3(6),
        PANORAMA_MODE_SPHERE(8),
        PANORAMA_MODE_180(9),
        PANORAMA_MODE_SUPER_RESOLUTION(10),
        UNKNOWN(255);