Hi,

I cannot find this information in the specification. Can someone tell me how big are the sensors in mm in the Zenmuse H20 (wide and zoom)?

It's all here https://www.dji.com/au/zenmuse-h20-series/specs

Craig_Tas Posted at 2-24 20:57
It's all here https://www.dji.com/au/zenmuse-h20-series/specs

Hi,

Yes I looked at that page, but I don't find the sensor size in mm. Can you tell where is it?

Thanks!

s.celestino Posted at 2-25 00:35
Hi,

Yes I looked at that page, but I don't find the sensor size in mm. Can you tell where is it?

It's not in mm, only inches. It has sensor as the first line under each camera heading as you scroll down.

Even Google shows you the results if you type in "zenmuse h20t camera sensor specs"

Craig_Tas Posted at 2-25 15:39
It's not in mm, only inches. It has sensor as the first line under each camera heading as you scroll down.

Even Google shows you the results if you type in "zenmuse h20t camera sensor specs"

Yes already see the tech specs into the official page. It indicates only this is a CMOS 1/1.7'', but I would like to know exactly which on is on the H20, I need to know the phisical sensor size not a general specification. The CMOS 1/1.7 can have different sizing depending on the vendor (see the image). So I'm looking more to technical documents.

s.celestino Posted at 2-25 23:52
Yes already see the tech specs into the official page. It indicates only this is a CMOS 1/1.7'', but I would like to know exactly which on is on the H20, I need to know the phisical sensor size not a general specification. The CMOS 1/1.7 can have different sizing depending on the vendor (see the image). So I'm looking more to technical documents.

[view_image]

The only way to get that information would be to log a request with DJI support and if you're lucky they will give it to you. Otherwise you would need to wait for someone to either pull apart the Zenmuse H20 and H20T and inspect it's internals or they also acquire the details from inside source and publish them.

You're in the same boat as everyone else, sorry I couldn't assist more.

Hi,

in the specifications they give you the pixel pitch (12 μm) and the resolution (640x512 px). If you multiply them you should have the physical dimensions of the sensor, I think.

So, sensor width by height should be: (12 μm x 640 px)*(0,001 mm/μm) mm by (12 μm x 512 px)*(0,001 mm/μm) mm = 7,68 mm width by 6.144 mm height

Hope that helps! (I was having the same problem finding the physical sensor size)

Hi,  H20T :  Zoom lens: sensor size  mm 7.41 x 5.56;  Wide lens: sensor size  mm 7.41 x 5.56