Please select Into the mobile phone version | Continue to access the computer ver.
Gray Screen / Image Transmission Signal Weak / No SD Card
162 2 3-6 18:08
Uploading and Loding Picture ...(0/1)
o(^-^)o
lostatsea
lvl.1
Flight distance : 19820 ft
Philippines
Offline

This seems to be a common problem. The drone flies okay. I can even move the camera up and down using the remote (so there IS a connection with the gimbal). But there's just no image. I've also tried to insert several SD cards and none are detected.

I tried the common solution of removing the SD card,  but that didn't work.

I tried downgrading the firmware (from 1.9.2) but couldn't downgrade since the SD card can't be read.

It temporarily worked one time after I did IMU calibration and I thought that was done. But when I took it out to fly, no image again. Since then,  fiddling with the settings hasn't worked.

Anyone have a solution?
Screenshot_20210306-150849_DJI GO.jpg
Screenshot_20210306-154352_DJI GO.jpg
3-6 18:08
Use props
lostatsea
lvl.1
Flight distance : 19820 ft
Philippines
Offline

Just to add: this started after I kept the drone in storage for around 2 years. I got it out to take some images of a property, but it didn't work anymore.
3-6 18:10
Use props
lostatsea
lvl.1
Flight distance : 19820 ft
Philippines
Offline

Anyone?

Any idea if this is a software issue? Or the flex cable? Gimbal board?
3-7 23:02
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules