Lately I have occasional problem of my mini 2 not responding to descend command. Pulling the stick all the way down to 6 o'clock & even when landing command was initiated, it just hovers there . Height is >40meter.
All others stick commands have no issues,  able to climb, yaw & turn.
Even when I initiates RTH or Signal loss RTH, it will attempt the RTH but on final approach before the descend, it just hovers there.
This is really harrowing unable to land!
Only by doing some up stick n down stick movements it budge a little by little.
DJI please advise what to do.
I have check the flight data & all are recorded as I described above.
Thank you.

I have the same problem, have you managed to solve it?

Gumiere Posted at 5-6 15:38
I have the same problem, have you managed to solve it?

It happens again twice but each time I have managed to bring it down by pushing stick up n down. Seriously I don’t know what happened . Symptoms looks like jamming or hijack of signals.
With the latest firmware hopefully no more such issues.

djiuser_pB8eJ2ds2AUJ Posted at 5-17 19:09
It happens again twice but each time I have managed to bring it down by pushing stick up n down. Seriously I don’t know what happened . Symptoms looks like jamming or hijack of signals.
With the latest firmware hopefully no more such issues.

On what current firmware is this?

The latest back then was 1.3 something

I have the same problem, do you have any updates? Managed to solve?

Any update on how to fix this? I had it happen this morning over the North Sea and it wasn’t very confidence inspiring