Please select Into the mobile phone version | Continue to access the computer ver.
how to make the dji mavic pro run the motor in place without flyi...
132 12 4-11 18:38
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_lK23fQ5Z7hEe
lvl.2
Flight distance : 748 ft

South Korea
Offline

I want to know how to make the dji mavic pro run the motor in place without flying in the air?

I tried the function of changing the parameter value( g_config_takeoff_auto_takeoff_height = 0)  using dji assistant 2 in developer mode.
But I didn't get what I wanted.

What parameters need to be changed or how can I make the motor run in place without flying?


4-11 18:38
Use props
Mats Bohlinsson
Second Officer
Flight distance : 1558228 ft
Sweden
Offline

DJISDKManager.getInstance().getProduct().getFlightController().turnOnMotors(None)
4-11 21:42
Use props
djiuser_lK23fQ5Z7hEe
lvl.2
Flight distance : 748 ft

South Korea
Offline

Mats Bohlinsson Posted at 4-11 21:42
DJISDKManager.getInstance().getProduct().getFlightController().turnOnMotors(None)

What you write down means a function inside the mobile sdk?


Another question is that I want to know the difference between mobile sdk & DJI GO app
4-11 22:39
Use props
Mats Bohlinsson
Second Officer
Flight distance : 1558228 ft
Sweden
Offline

djiuser_lK23fQ5Z7hEe Posted at 4-11 22:39
What you write down means a function inside the mobile sdk?

It's a developers forum.

I dont understand your question.
Whats wrong with the plain CSC command? It's the same as turnOnMotors.
4-12 10:29
Use props
Djimaniac
Second Officer
Flight distance : 2687959 ft
  • >>>
United States
Offline

I dont understand what your asking? If you want to run motors, remove props, and arm motors....then you can throttle up and down to run motors......IF i understand what your wanting to do....if not, discard my comment.  
4-12 17:29
Use props
Garrygb
lvl.2

Ukraine
Offline

Also have the same problems!
4-13 23:08
Use props
djiuser_lK23fQ5Z7hEe
lvl.2
Flight distance : 748 ft

South Korea
Offline

Djimaniac Posted at 4-12 17:29
I dont understand what your asking? If you want to run motors, remove props, and arm motors....then you can throttle up and down to run motors......IF i understand what your wanting to do....if not, discard my comment.

My question was that I only want to make the motor run without flying the drone.
However, the problem was that when I wanted to make the drone's motor run through the controller, the only command I knew was the takeoff command, so I only tried to take off through the DJI GO app.
Therefore, when the propeller was pulled out and implemented, the problem as shown in the picture occurred.
In order to cope with this method, is there anything that needs to be modified by entering developer mode in the DJI Assistant program?? Or I wonder if there is another way.

error

error
4-14 03:33
Use props
Djimaniac
Second Officer
Flight distance : 2687959 ft
  • >>>
United States
Offline

Pull both sticks in and down to start the motors manually.
4-14 04:00
Use props
djiuser_lK23fQ5Z7hEe
lvl.2
Flight distance : 748 ft

South Korea
Offline

Djimaniac Posted at 4-14 04:00
Pull both sticks in and down to start the motors manually.

Could you explain more specifically, please
I don't know what both sticks (control lever?)  means and other things
4-14 04:16
Use props
Djimaniac
Second Officer
Flight distance : 2687959 ft
  • >>>
United States
Offline

Pull both joysticks, control sticks on the controller down and inward untill motors start.
4-14 07:19
Use props
Mats Bohlinsson
Second Officer
Flight distance : 1558228 ft
Sweden
Offline

djiuser_lK23fQ5Z7hEe Posted at 4-14 04:16
Could you explain more specifically, please
I don't know what both sticks (control lever?)  means and other things

I think you better read the usermanual. It's very well described there, and considered basic knowledge how to stop the motors in an emergency.

Search for CSC. Combination Stick Command
4-14 10:30
Use props
djiuser_lK23fQ5Z7hEe
lvl.2
Flight distance : 748 ft

South Korea
Offline

Mats Bohlinsson Posted at 4-14 10:30
I think you better read the usermanual. It's very well described there, and considered basic knowledge how to stop the motors in an emergency.

Search for CSC. Combination Stick Command

Thank you!!!
I Solve it by using CSC mode !!
4-27 00:17
Use props
Mats Bohlinsson
Second Officer
Flight distance : 1558228 ft
Sweden
Offline

djiuser_lK23fQ5Z7hEe Posted at 4-27 00:17
Thank you!!!
I Solve it by using CSC mode !!

Haha glad to help!

One nice thing is, that if you throw the drone up in the air, it starts hovering, all by itself.

I use this teqnuiqe when launching from tricky places. You can even throw it out of a window :-)
4-27 02:12
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules