Good morning all,
Have you found a parameter to modify the % of the "low battery" alert;
I am not talking about the "low battery" alert which is done automatically in relation to the return of the drone depending on the distance, but the alert which occurs at 30 % of remaining charge and this even if the drone is flying at 100 meters from me;
When I am in N or S mode, when this alert occurs, it stops the drone.
When I film, this alert and this sudden stop ruins the sequence I am filming.
I would like to modify the % of this 1st alert from 30 to 20 see 15 % and especially that the drone does not stop suddenly when this alert appears.
Thank you.

Great Question I'm am also looking for the same information

This is not currently available as a changeable option

you might give this one a go https://drone-hacks.com/
I am not sure it it does the trick but they claim you can adjust some parameters ...

tomekyo Posted at 4-16 05:25
you might give this one a go https://drone-hacks.com/
I am not sure it it does the trick but they claim you can adjust some parameters ...

No, in my case, this hack is useless: it simply allows you to change the location to be in FCC mode.
This hack does not allow you to modify any parameters

I do not have this issue, the drone will say RTH press brake in 10 seconds. I usually catch it in time

fans4e8af4f6 Posted at 4-16 09:21
No, in my case, this hack is useless: it simply allows you to change the location to be in FCC mode.
This hack does not allow you to modify any parameters

I think you should look again but this time also read ... FCC mod is only one of the things they offer ...

g_config.voltage2.level_1_voltage default = 25 range = < 10 .. 100 >
g_config.voltage2.level_2_voltage default = 5 range = < 0 .. 100 >
g_config.voltage.level_1_protect default = 3800 range = < 3600 .. 4000 >
g_config.voltage.level_2_protect default = 3400 range = < 3200 .. 3800 >
g_config.voltage2.level2_smart_battert_gohome default = 15 range = < 0 .. 100 >
g_config.voltage2.level2_smart_battert_land default = 5 range = < 0 .. 100 >

well noted @fansebae