phildeman
lvl.1
United States
Offline
|
phildeman Posted at 5-2 14:14
I have a DJI Mavic Air2S. I can connect with the remote controller that came with the drone. I decided to invest in the Remote Controller RC so that I don't have to be concerned with my phone ringing while the drone is in flight.
However, I cannot get the DJI Remote Controller RC to connect with the Mavic Air 2S.
I found the way to connect the Remote Controller RC to the Mavic Air 2s, by downloading the remote controller manual, which does not come with the remote controller. Here are the instructions:
The remote controller is already linked to the aircraft when purchased together as a combo. Otherwise, follow the steps below to link the remote controller and the aircraft after activation.
1. Power on the aircraft and the remote controller.
2. Launch DJI Fly.
3. In Camera View, tap … (at the top left of the screen) and select the Control tab.
4. Scroll down to the Re-pair to Aircraft (link) and tap the link.
5. Press and hold the power button on the aircraft for more than 4 seconds. The aircraft will beep once when it is ready to to link. After the linking is successful, the aircraft will beep twice and the battery LEDs of the remote controller will appear on and solid.
Note: As the linking process progresses, follow the instructions on the pop-up screens. |
|