Hi

Just tested my new AVATA in MANUAL MODE with the controller but found this:

- Still stabilized. I thought it will ´fall down´ if i cut off throttle, but it remains at same altitude like in Normal or Sport mode (left stick without spring)
- Speed limit. It's slower than in Sport mode.
- Angle limits: Unable to do loopings in any direction. Less than 30 degrees aprox of angle limit.


Sure I'm doing something wrong.
But the Drone gets in Manual mode, the camera angle changes to 14deg aprox (like a normal FPV drone) and I see a M in the screen :-). Also enable and disable the Limit in the controller ROLL/YAW/PITCH RATES screen (sorry I don´t remember the item name).

Can anyone tell me what i´m doing wrong?

THANKS IN ADVANCE


In the meantime, really surprised with the Joystick (Motion Controller). Really easy and intuitive. And lets you do things really complicated for normal FPVs drones (more than 3 years of experience/crash/repairing)

You missed a tick in the menus of goggles allowing loops - Just refer to manuals

alex_markov Posted at 9-2 09:57
You missed a tick in the menus of goggles allowing loops - Just refer to manuals

THANKSSSSSS
Sorry, but where is this button?

I havent seen it on the manuals

JAMh Posted at 9-2 10:27
THANKSSSSSS
Sorry, but where is this button?

In the goggles, under Control, select remote control, Gain & Exp. There is a switch that removes the roll limit.

Only available with the FPV Remote 2. Once that switch is turned off, you will be able to roll and loop.

Buzzyone Posted at 9-2 10:43
In the goggles, under Control, select remote control, Gain & Exp. There is a switch that removes the roll limit.

Only available with the FPV Remote 2. Once that switch is turned off, you will be able to roll and loop.

I did it.
Tested with this ON and OFF...

Will try again

Of course it's with the remote control, because with the joystick u dont have this option

THX

Try again, it does indeed remove the roll & loop protection.

You also need to change the Custom Button (switch) to Manual as it’s default isn’t that!

Once you have done this and turned off the roll limit, when switching the switch to Manual you should see two squares in the goggles, you have to set the sticks to the green marks and then the drone will go into full manual mode.

I dondt see the option for the flips.
Custom button is set to manual.

he first time i set it to manual te 2 check boxes apeared and after set the stick to the green, they never show up anymore

djiuser_M9Y9jMBVs6JL Posted at 9-3 01:36
[view_image]

I dondt see the option for the flips.

You have the M Mode Attitude Limit set correctly, have you set the Custom Mode to Manual too?

Buzzyone Posted at 9-3 01:50
You have the M Mode Attitude Limit set correctly, have you set the Custom Mode to Manual too?

[view_image]

yes i did set it up to manual

I would probably do a reset and have another go, it does work, was doing loops and flips yesterday.

Reset the goggles and the remote options and try again.

can share screenshot of that option?

Quelle est la porter ou bien la distance de vol Maximal du avata

THX

Finally the last firmware update fixed it.

It was strange as I did everything all of u said.

THANKS 2 ALL
PD:
If anyone wants to check my videos:

Here in Spain:
https://forum.dji.com/forum.php?mod=viewthread&tid=273742
https://forum.dji.com/forum.php?mod=viewthread&tid=274158

And here at Caribbean sea:
https://forum.dji.com/forum.php?mod=viewthread&tid=275046

Flying manual on restricted zones is not possible....