Overview

• Date: 2024.11.26
• DJI Video Receiver Firmware: v01.07.0801
• DJI Video Transmitter Firmware: v01.07.0801
• DJI High-Bright Remote Monitor Firmware: v01.07.0802
• DJI Assistant (Ronin Series): v2.1.13
  

What’s New?

• Added support for the DJI Video Transmitter to set password in Broadcast mode.
• Improved audio and video compatibility.
• Fixed stability related issues.
  

Notes:

• Set the Type-C function of the DJI Video Receiver and DJI Video Transmitter to USB before updating the firmware via DJI Assistant 2 (Ronin Series). DO NOT disconnect the DJI Video Transmitter and DJI Video Receiver from the computer during the firmware update.
• Mount the hand grips to the DJI High-Bright Remote Monitor for firmware updates.
• Make sure to update all the video transmission devices to the latest firmware version when using them together. Otherwise, the video transmission may work abnormally.
• If the update fails, restart the device and try again.
  

---

Overview

• Date: 2022.09.29
• DJI Video Transmitter Firmware: v01.05.0100
• DJI High-Bright Remote Monitor Firmware: v01.05.0100
• DJI Video Transmitter User Guide: v1.0
• DJI High-Bright Remote Monitor User Guide: v1.2
  

What’s New?

• Added support to use the remote monitor with the DJI Video Transmitter.
• Added function to turn off the screen display of the remote monitor by pressing the power button once and function to lock the touch screen by pressing the power button twice.
• Added webcam function to the USB-C port on the remote monitor to upload audio and video streams from O3 Pro video transmission system to a computer.
• Added support to mount the hand grips to the remote monitor for firmware updates.
• Added support to control the gimbal and camera on Ronin 2 and RS 3 Pro using the hand grips.
• Added function to set the HDMI/SDI output frame rate of the remote monitor expansion plate automatically according to the input image frame rate on the video transmitter.
  

Notes:

• Make sure to update both the video transmitter and high-bright remote monitor to the latest firmware version when using them together. Otherwise, the video transmission may work abnormally.
• If the update fails, restart the device and try again.
  

thanks dji...

Thanks for the info!

Thanks for the info.

Is te already possible to record on the screen?
When will the expansion plate be on stock?

Papaxiclas Posted at 9-29 09:16
Is te already possible to record on the screen?
When will the expansion plate be on stock?

Hi, there. Sorry for the late reply.Hope the following details can help you:

1. If you want to record, you can check the below information:
1). Please try to install the Micro SD card into the Micro SD card slot on the right side of the DJI image transmission highlighter;
2). And please connect the DJI Image Transmission Highlight Monitor to the DJI Ronin 4D/DJI Transmission, and click the circular icon at the bottom of the screen to enable the recording function.

2. We did not receive any relevant information about the expansion plate, you can stay turn to our official website to get the latest details.

Thank you for your support.

why isn't audio embedded in the SDI output of the bright monitor?

In the manual it is written that you can also see the battery status of the transmitter on the screen.

It's not visible on my screen. Only the battery status of the screen

Is this a setting?

I use the DJI batteries

This new RC controller does not do what advirtised to do on mini 3 pro. I feel I was ripped off. This has less distance the the ocusync 2.0. I hope they will correct this. This was my second DJI drone and distance is not good at all. It was unabstructure and only a 10th of what DJI SAYS IT WILL DO.

I ordered the transmission in Europe, testet it with my account - now I am in the US for a production, but I can not change the monitor into the FCC mode. I tried everything, installing the software again,... how can I achieve the transformation to the FCC mode??

Is there even a way to change from CE to FCC? I tried installing and activating the software with VPN set to USA but still locked in CE mode.

Just bought Action 3 and webcam work fine. But why there is no possibility to zoom in?
With at least 2x zoom the scene would be much more natural

My DJI Assistant 2 doesn't allow me to update...

Hi There, Im having issue updating the firmware on the transmitter, anyone else having this issue?

"Added support to control the gimbal and camera on Ronin 2 and RS 3 Pro using the hand grips." with Firmware update v01.05.0100
How do I connect the Ronin 2 to the DJI Remote Monitor?
Its not working right? Only Ronin RS3?

Oh thank you, finally.