DJI Gamora
Administrator
Offline
|
Hi, djiuser_GobraPd0RJFu. Thank you for reaching out and we're sorry for the inconvenience. Please follow the troubleshooting steps below:
1. Check whether the DJI FPV Goggles V2 is in FPV mode. If it is in the DJI Digital FPV System mode, please switch to the FPV mode. Then, link the aircraft with the remote controller.
2. Download the DJI Assistant 2 (https://www.dji.com/downloads/products/dji-fpv) to your PC. Connect to DJI Assistant 2 (Consumer Drones Series), and refresh the firmware of the DJI FPV Goggles V2, DJI FPV aircraft, and remote controller. Restart the three devices, and link the DJI FPV with the DJI FPV Goggles V2 again by following the steps below:
• Press the Link button on the DJI FPV Goggles V2 until you hear two short beeps. Press and hold the aircraft’s Power button. After the linking is successful, the aircraft status indicator will blink yellow quickly.
• Press and hold the remote controller’s Power button until you hear two short beeps. Press and hold the aircraft’s Power button. After the linking is successful, the aircraft status indicator will blink yellow slowly (indoors without GPS).
For details, refer to the videos at: https://www.dji.com/cn/dji-fpv/video
If the issue persists after the above-mentioned steps have been tried, please let us know. Thank you for your cooperation and kind understanding. |
|