Lost Somewhere
lvl.3
United States
Offline
|
Hi all,
I modeled some landing legs that attach to the bottom of the Mini 3 Pro and raise it up a good inch. They work pretty well, but I printed them on an SLA with Tough 1500 resin that tends to cure about .003" oversize. So if you print it on FDM then it might fit a bit different. It weighs around 7.6 grams accoring to the CAD model in solid ABS.
I wanted something that I could leave on and that just folded up when not in use and would still fit in the bag. This also helps hold the rotors from moiving around. It seems to work pretty well so I thought I'd put it out for anyone who felt like playing around. It helps for landing in grass or on an uneven surface.
Good luck.
The files are too big to upload to DJI, but here's a link where you can get the STL files.
GrabCAD
https://grabcad.com/library/mini-3-pro-legs-1
|
|