Hello friends
Any chance for help tracking down a DJI Action 2 Magnetic Ball Joint Adapter Mount for my remote extention rod
So it can be attached to my action 3 . I cant seem to find one

I have this one
https://www.aliexpress.com/item/1005003961035776.html

It is very small (as you can see it in the photo it fits in your palm). At the bottom it has a 3/8” to 1/4” adapter that you can remove so you can use it on big tripods as well if you wanted to. Very good quality.

You can use a standard GoPro adapter at the top like this one with it and put the DJI magnetic adapter into this one. Just make sure the GoPro adapter is plastic because the aluminum ones need very strong tightening.
https://www.aliexpress.com/item/1005004211275951.html

Also, the nice thing about the above ball joint mount is that I have a bicycle mount (link below) that I screw the ball joint mount on top of it. Then I can attach the 1.5m extension rod on top of the ball joint mount, extend it to whatever height, and shoot timelapses or whatever from my bike (while it’s stationary of course).
https://www.aliexpress.com/item/1005005484393182.html

osmonauta Posted at 7-27 01:29
Also, the nice thing about the above ball joint mount is that I have a bicycle mount (link below) that I screw the ball joint mount on top of it. Then I can attach the 1.5m extension rod on top of the ball joint mount, extend it to whatever height, and shoot timelapses or whatever from my bike (while it’s stationary of course).
https://www.aliexpress.com/item/1005005484393182.html

Thanks that's nice. The only downside is the screw that sticks out bot other than that it's great and I have ordered one

Hello there. Thank you for reaching out Is this the one that you are looking for? https://store.dji.com/product/dj ... r-mount?vid=109011. It's available from the DJI online store. Have a great day ahead.

Re u sure it has a 1/4 hole at the bottom. ?

M.Bliss Posted at 7-27 02:29
Re u sure it has a 1/4 hole at the bottom. ?

I bought mine from the link I sent. Expand the description images and you will see. It has an adapter. When you put the adapter in at the bottom, it is 3/8 inches. When you remove it, it is 1/4”.

I can make some photos later if you need it, but the product photos shows the same thing. This is how it looks like

https://ae01.alicdn.com/kf/S0f282f5f01e54df18f41f6cc0499084bB.jpg_640x640q90.jpg

osmonauta Posted at 7-27 02:48
I bought mine from the link I sent. Expand the description images and you will see. It has an adapter. When you put the adapter in at the bottom, it is 3/8 inches. When you remove it, it is 1/4”.

I can make some photos later if you need it, but the product photos shows the same thing. This is how it looks like

The link you sent me to opens this...
Looks different than the picture you sent, no?

use a rubber ring (Swing top bottle rubber ring )

M.Bliss Posted at 7-27 03:58
The link you sent me to opens this...
Looks different than the picture you sent, no?

I didn’t sent you that link. DJI did.

I prefer the 1.50m dji selfie stick

In the photo above, the silver looking part is the adapter. Leave it in and it's 3/8" thread. Remove it and it's 1/4" thread.




Photo above: with the GoPro adapter and DJI magnetic mount attached.




Photo above: ...and now they attached to the ball mount.




Photo above: DJI extension rod attached to the ball mount.




Photo above: DJI extension rod attached to the ball mount which is attached to the bike.




Photo above: DJI magnetic mount attached to GoPro adapter and they all attached to the ball mount on the bike.

I must say this is one of the most outdated, stupid 80s forum still in existence today. For some reason I had the text "Had my first underwater test" stuck at the top of my previous post (above). When I try to edit it, it doesn't show up so there's no way to remove it.

osmonauta Posted at 7-27 05:22
I must say this is one of the most outdated, stupid 80s forum still in existence today. For some reason I had the text "Had my first underwater test" stuck at the top of my previous post (above). When I try to edit it, it doesn't show up so there's no way to remove it.

go to desktop version and you can remove all

osmonauta Posted at 7-27 05:19
[view_image]
[view_image]

[Image]

@osmonauta
Telesin ball mount

lutzmix Posted at 7-27 08:15
go to desktop version and you can remove all

I AM on the desktop version and cannot remove it.

lutzmix Posted at 7-27 04:23
I prefer the 1.50m dji selfie stick

Thanks for the help, great setup
whats that .....

M.Bliss Posted at 7-27 21:27
Thanks for the help, great setup
whats that .....[view_image]

Telesin metal tripod

I'm on quit a few forums but I must admit that this forum thanks to it's members is great. Thanks guys for making the purchase a fun experience.

I got this mini tripod. It’s all aluminum and love that it has 4 height settings! Very sturdy. In each leg there are threaded holes that you can screw in extra GoPro adapters and carry it with the tripod. Whoever thought of that was a genious!

https://www.aliexpress.com/item/1005004325881149.html