Hello to the community,

I have a problem with a Mavic 3 Ciné Prem, i can't have a altitude limitation, i set 30 meters (or whatever) but it continues to climb and climb without stopping. Do you know this problem ?
Many thanks !!

regards
Duch

Can you post the .txt flight log of a flight where this occurs? For instruction on how to retrieve the flight log see lower down
https://www.phantomhelp.com/logviewer/upload/

Hi there. Thank you for reaching out and we're sorry for the trouble. Can you please try to have a test flight in an open location with a strong signal and please provide us a screen recording showing the live feed during the issue so we can check it further. Please keep us posted. Thank you.

DO NOT try a test flight to those heights unless you are sending the drone up a hill that climbs to at least 380m above the take off point.

After some tests, this happens after unlocking NFZ certificates, imported into RCpro...
The altitud limit is functional when the certificates are deleted.

Sean-bumble-bee Posted at 7-28 00:48
DO NOT try a test flight to those heights unless you are sending the drone up a hill that climbs to at least 380m above the take off point.

Thanks to remind me, i perfectly know what to do.
regards