DJI Susan
Administrator
Offline
|
djiuser_CoEh9po7eeEE Posted at 5-2 06:34
I have Exactly same problem!(Issue/situation) Stuck on 60% calibrating gimbal. I have turned off and on. Replaced battery's. I even tried to touch the gimbal a little and nothing.. then when drone is moved, calibration is ended..
Hi there, we are sorry for any inconvenience, you could please refer to the following steps and check first, thanks.
1. Please check if the gimbal is stuck by a foreign object. If yes, please remove it.
2. Please restart the drone, and then let the drone on a level surface to calibrate again. Do not touch the gimbal during calibration.
3. Please refresh the firmware version, and make sure the firmware version is the latest.
If the calibration still fails after trying, it is highly recommended to send it back for a comprehensive check to ensure long-term usage. You could register through the following link, https://repair.dji.com/, to create a case and send back the device for diagnosis. If you need assistance while submitting, you could also contact with our support service, http://www.dji.com/support. Thanks. |
|