Hello,

Since few days, when flying the P1 on M300, I have the orange message "Intrinsic calibration data expired" on the top left corner of Pilot2.

And in the HMS, I have the message "Infinity Focus Calibration Data Expired"

How to solve the problem please? Clearly (process from A to Z). I didn't find anything about it.

I saw another old topic about it, but there is no clear answer.

Thank you.

Hi there, sorry for the issue you encountered. Could you please double confirm the current firmware of the aircraft and P1 camera for better confimation? Thank you.

DJI Susan Posted at 9-22 04:41
Hi there, sorry for the issue you encountered. Could you please double confirm the current firmware of the aircraft and P1 camera for better confimation? Thank you.

M300 : 07.00.0100
P1 : 07.00.01.10

My last calibration is from 23 august 2022. Do we have to calibrate it each year?

R_CAPTURE Posted at 9-22 05:34
M300 : 07.00.0100
P1 : 07.00.01.10

Thank you for your confirmation. Please try to calibrate the focus again. Steps:
1. Mount the Zenmuse P1  on the M300 RTK, with the aircraft and remote control turned on.
2. Visit the APP, and click the icons below to calibrate the lens.

3. Take off the aircraft, fly above 102M (335ft) and click "Start Calibration".
4. Adjust the gimbal angle to -90 degrees (ortho to ground) and click on the richly textured object in the center area of the screen.
If still doesn't work after doing the calibration many times, you are recommended to send the gimbal and lens to us for diagnosis and repair when you are convenient.
Sorry for this.