As previous generation Mini3pro have Lens foggy issue.
So,anyone have experice it with Mini4Pro? or the Lens foggy problem been solved?


Related Post:
https://forum.dji.com/forum.php?mod=viewthread&tid=290792

It may be a bit early to tell, yet.

I thought they fixed the issue in a recent Mini 3 Pro revision as well by adding a small heating element to the lens to prevent fog.

No issue with my unit.

Ive seen plenty of complains about the Mini 4 but fogging is not one of them.  

Hi,
The Mini 4 Pro has the heating element inside the gimbal to prevent fogging. As was done on the Mini 3. The Mini 3 Pro however does not have this system. At minute 21:44 of the following video there is the verification with the thermal camera

As Danveal mentioned Mini 4 pro now has heating ring around the lens to keep the fog away, some of the mini 3 pro which were sent for repair to dji for fog issue also have been fitted with such heating element.

Danveal Posted at 10-3 01:43
Hi,
The Mini 4 Pro has the heating element inside the gimbal to prevent fogging. As was done on the Mini 3. The Mini 3 Pro however does not have this system. At minute 21:44 of the following video there is the verification with the thermal camera

Interesting!
Hope mine won't fog up.

Just noticed mine is fogging up now, over a year old now so will probably have a go at reseating the o-ring myself