Is there something you put on the feet of your Inspire 1 to keep them from getting scuffed?

Sure thing i use passages from the Bible in hopes it will bring all four feet closer to "mother earth" -- and in the correct order! (smile)

Buddy uses cut pieces of black electrical tape. Cheap & easy to swap out when needed

you can buy little furniture stickys i have little clear round pieces that stick on and they are non skid look at any local hardware store they are great!!

wyattsantiago, I used these non-slip pads:
http://www.amazon.com/gp/product/B00HZ9YWWG/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00HZ9YWWG&linkCode=as2&tag=ih01a-20&linkId=7DAF7BUL6VPXNUFI

To cut them to fit, I set the Inspire 1 foot on a piece of paper, traced it, cut it out, and use that as a pattern to cut out the pads. With these pads installed, you'll keep your landing gear feet scratch-free and prevent them from slipping when landing on hard surfaces.

---

www.InspireHelp.com
Find the latest must-haves, fixes, mods, how-tos, guides, and accessories for your Inspire.
Inspires in stock and ready to ship worldwide! (see availability)

As tim says above, Furniture pads.  I have them on my Inspire.  Just by a pad or larger round pads and draw round the Inspire feet, cut and stick on.  They do what is expected and stop the feet getting scratched and damaged.

Baby socks are the way forward, winter is coming!!!

Here they are.