DJI Natalia
Administrator
Offline
|
Hello djiuser_xPpj3TDuy4eb. We sincerely apologize for the inconvenience you have experienced. The Osmo Action GPS Bluetooth Remote Controller connects to the Osmo Action 4 via Bluetooth. This allows you to control the camera remotely, enabling you to capture footage with ease.
The remote controller supports both single-camera and multi-camera control modes, allowing you to operate up to 16 cameras simultaneously. It is equipped with built-in satellite positioning modules, which provide accurate data recording while in motion. When used with DJI Mimo, you can enrich your videos by adding various collected data, such as speed, route, direction, and elevation. Please take note of the important information below:
1. After the initial pairing between the Osmo Action GPS Bluetooth Remote Controller and the camera, there is no need to pair them again. The remote controller will quickly connect to the camera once powered on.
2. Due to the abnormal GPS coordinates in the photos taken with the Osmo Action GPS Bluetooth remote, the GPS coordinates in images taken with the Osmo Action 4/5 Pro after connecting to the GPS Bluetooth remote are inaccurate.
Reminder: This issue will be addressed through firmware updates, so keep an eye on the official website for release notes.
If you have any further questions or need assistance, please feel free to contact us. Thank you for choosing DJI. |
|