I want to express my disappointment with the lack of proper support for iNav once again. They had plenty of time to fix it since the complaints after O3 was released, and they didn't. There are no improvements to the OSD whatsoever. DJI refused to include support for MSP-OSD and thus we are missing all additional symbols that iNav has to offer.

I'm done with this brand. Not everyone flies Betaflight.

So shortsighted. 100% agree. Also done with DJI after this lack of support.

Hi there!

Thank you for your feedback. Currently, the DJI O4 Air Unit Series/DJI O3 Air Unit does not support INAV. We will report your recommendations to the DJI engineers for evaluation. If it is supported later, we will release a new firmware version. Please keep an eye on the DJI official website. Thank you for your understanding.

DJI Natalia Posted at 1-13 03:08
Hi there!

Thank you for your feedback. Currently, the DJI O4 Air Unit Series/DJI O3 Air Unit does not support INAV. We will report your recommendations to the DJI engineers for evaluation. If it is supported later, we will release a new firmware version. Please keep an eye on the DJI official website. Thank you for your understanding.

The same reply that was given when O3 was released. How am I, as a customer, supposed to take your word for granted...

DJI Natalia Posted at 1-13 03:08
Hi there!

Thank you for your feedback. Currently, the DJI O4 Air Unit Series/DJI O3 Air Unit does not support INAV. We will report your recommendations to the DJI engineers for evaluation. If it is supported later, we will release a new firmware version. Please keep an eye on the DJI official website. Thank you for your understanding.

You said that with O3 … nothing happened
Why is it now different ?
There were 100s of posts when O3 came out and you decided to make it even worse !!!!

DJI Natalia Posted at 1-13 03:08
Hi there!

Thank you for your feedback. Currently, the DJI O4 Air Unit Series/DJI O3 Air Unit does not support INAV. We will report your recommendations to the DJI engineers for evaluation. If it is supported later, we will release a new firmware version. Please keep an eye on the DJI official website. Thank you for your understanding.

are you a robot?

Once again, DJI turns its back on INAV. WTF?

The entire thing is a farce. Apparently, there was some semblance of a hint of DJI seeming to take steps to potentially include inav fonts in an unreleased firmware build. Now, not only did they remove this from that build, but they have somehow ensured to break inav compatibility completely. This is NOT inav dev’s responsibility. They simply cannot design a system to work with you if you are changing their goalpost every once in a while on a whim, pretending inav doesn’t exist. Now, here we are: hundreds of customers disappointed and distrustful of you, hundreds others that have moved on from you and gone with any other digital fpv system never looking back, while the entire fpv community despises you whether they use your products or not. Meanwhile, you continue to gaslight your way through, like you did with inav fonts, always giving robotic bot answers and making sure you don’t commit to anything. How many customers do you have to loose before you commit to a change?

DJI Natalia Posted at 1-13 03:08
Hi there!

Thank you for your feedback. Currently, the DJI O4 Air Unit Series/DJI O3 Air Unit does not support INAV. We will report your recommendations to the DJI engineers for evaluation. If it is supported later, we will release a new firmware version. Please keep an eye on the DJI official website. Thank you for your understanding.

Alternatively just use Caddx walk snail. Despite their problems that are at least attempting to cater to their customers instead of dictating to them. Shout out for coming out with the O4 lite. Credit where credit is due

SharBike Posted at 1-18 14:19
Alternatively just use Caddx walk snail. Despite their problems that are at least attempting to cater to their customers instead of dictating to them. Shout out for coming out with the O4 lite. Credit where credit is due

We are grateful for your support of our product, we will keep moving to provide more products with good quality and professional customer service. If you have any further questions or concerns, please do not hesitate to contact our support team.

Have a good day ahead!

And more gaslighting…

DJI Natalia Posted at 1-18 16:17
We are grateful for your support of our product, we will keep moving to provide more products with good quality and professional customer service. If you have any further questions or concerns, please do not hesitate to contact our support team.

Have a good day ahead!

It wouldn't surprise me if we are simply talking to an ai bot.

Facebook uses em in the oculus world. Quite disgusting...

Imagine how little work, man hours, budget it would take for dji to throw out a firmware update.

I suppose my entry in to the dji ecosystem will be stopped here.  Back to analogue+gopro I guess