Elite Air, LLC
 lvl.1
Flight distance : 176811 ft
United States
Offline
|
Hey guys,
Been playing around with the X5 for a day or so now. been updating all my batteries. I did notice that the I1 updates fine and says "normal operation" but I see that the 3rd packet always fails when im doing an update. Any idea on what that is? should I be worried?
Here is what a typical .txt file looks like from my bird.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.00.00.30.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:15 remo-con disconnect======
Packet: WM610_FC550_FW_V01.00.00.30.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:52 remo-con disconnect======
Packet: WM610_FC550_FW_V01.00.00.30.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: WM610_FC550_FW_V01.00.00.30.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.00.00.30.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.00.00.30.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.00.00.30.bin
Upgrading ...
Result: Success.
|
|
