I'm stumped as to where to find where to set the failsafe altitude.  I'm thinking 264 feet currently reflected in DJI GO is too high
I refered to the insgtrucition attached but for the life of me could not navigate to this spot.  Can anyone help direct me.  

See photos below and you can find the fail safe easily






Set the failsafe altitude higher than your obstacles in the area you are flying. The photo above shows "0" because the aircraft is not connected....


Rich

When you enter the "RTH" consider the terrain where you will be flying. The "RTH" should be more than the highest point of your flight. Also it is in Meters in the Menu. I use Imperial in the program but for some reason the "RTH" remains in Meters

Please set your RTH altitude higher than any obstacles in your flight area

thanks all.  I was on the menu Rich illustrated, but on the 'general' settings instead of aircraft (noooooob