The P3S manual states the camera can tilt a full 120 degrees, which suggests it can tilt up another 30 degrees above the horizon (accoring to the diagram).  Is this true, or am I misinterpreting the manual?  If it is true, where do you change the setting to the get the full camera tilt?  I can't find it in the DJI Go app.  I know it will probably catch video of the props at that angle of tilt, but it would be cool to experiment with it that's really an option.

Thanks.

BK in Colorado

I believe when the Gimbal is facing fully straight, when the drone is moving forward it reaches 120 degrees. You cannot do it manually.

I believe when the Gimbal is facing fully straight, when the drone is moving forward it reaches 120 degrees. You cannot do it manually.

there IS an option that has to be turned on in one of the setup menus of the GO app.   it turns on the +30deg movement of the camera gimbal (otherwise limited to 0 to -90).  i don't have access to the app now to be more specific.  i did stumble across it after a few days.

It will go +30 to -90 automatically, and -90 manually.  But, within the app, you can turn on manual control allowing you to go +30 manually.  Be aware, when you do, you'll have the front props in the picture.

Yes, you can make the gimbal also tilt up. The settings is in the gimbal menu

AG0N-Gary Posted at 2016-1-3 20:51
It will go +30 to -90 automatically, and -90 manually.  But, within the app, you can turn on manual  ...

Do you know where the setting is in the app?

DJI-Ken Posted at 2016-1-3 20:59
Yes, you can make the gimbal also tilt up. The settings is in the gimbal menu

Thanks DJI Ken.

digitalknight Posted at 2016-1-5 13:52
Thanks DJI Ken.

No problem, if you haven't found it it's in the Gimbal Param Settings, then in Advanced.

See above. Mine is "put away" right now and I have no access.