DJI-Tim Posted at 2016-1-7 08:12
it could be caused by aircraft vibrations. Please try to change the vibration dampers and balance t ...
I have the same issue, but using Wookong-M controller and DJI-1187 GCU. The problem is characterised in my YouTube videos: and The Gimbal has already been returned once and a replacement was provided which has the same problem. I have been tearing my hair out trying to find the problem, but everything leads back to the unfortunate conclusion that the gimbal is faulty. My props & motors are both well balanced, it only seems to be at certain angles (but of course those are the ones I most want to use).
The replacement gimbal also has a tendency for the horizon to be slightly tilted to the right.
Just to clarify, is the WKM and GCU up to date with the latest firmware? Have you already performed an IMU and X1 calibration? Have you tried using differnt dampeners?
There is no facility for me to perform an IMU calibration with the Wookong-M assistant or GPU assistant software.
X1 (battery voltage) has been calibrated.
The problem is also evident when the quad is stationary, props not running. So this is not a vibration issue.