Hi there

I have succesfully updated my RC to the latest firmware. Everything works and the quad flys perfect. But the drone itself seems to be stuck on firmware 1.1.5+ (at least that is what the DJI GO App states - it also states that both the drone, the Gimball and the battery needs updates, but I cannot update from the App).

So I've gone for updating via the SD card. Formatted to either exFAT og FAT32 (tried both).

Every time i try updating it, it begins as expected beeping D-D-D-D for like 20-30 seconds then stops and do a singe DD-D-D. Then about 20 seconds later it starts over again. When examining the TXT-file I can see that the update has started over and over again (as many times as the process mentioned above has been rerun). The TXT-file is filled with something like this...

Any ideas?

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...

========== 2014.01.01 00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...

How long have you waited during the upgrade process? The only upgrade I did was from 1.32 to 1.4, but it took between 20-25 minutes. You might not be giving it enough time. Just a thought.

Jako,

See my post #4 in this thread: Update with Link Button

Jerry

gas.tube Posted at 2016-1-25 03:37
How long have you waited during the upgrade process? The only upgrade I did was from 1.32 to 1.4, bu ...

Hi there.

I've let it on for about an hour or more. Same result...

JtrJr-UAV Pilot Posted at 2016-1-25 03:55
Jako,

See my post #4 in this thread: Update with Link Button

Hi Jerry

Thank you.

I'll try that!

JtrJr-UAV Pilot Posted at 2016-1-25 03:55
Jako,

See my post #4 in this thread: Update with Link Button

Hi there.

Just tried your suggestion - but I get the same result. The beeping pattern seemed to be different than before, but the result were the same. Let it repeat a circular pattern of beeping for 1 hour and turned it off. My TXT file looks like this (but is even longer):

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin


My log file looks like this, but is filled with similar messages:

[00166844]Firmware upgrading[1]...
[00167842][08 00] Firmware upgrade start...
[00014802]========== remo-con disconnect. boot(2) ============
[00014886]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0xb0ce0fc2].
[00014971]Packet upgrade start...

[00015065]Packet checking...
[00015153]Packet vlink 01.06.0040 <-> 01.05.0030.
[00015271]Done.

[00015355]Version checking[1]...
[00027943][03 05][00] device not detected.
[00040524][03 06][00] device not detected.
[00040619][04 00][00] v1.36.0.0 -> v1.41.0.0 need upgrade.
[00053213][11 00][00] device not detected.
[00065796][12 00][00] device not detected.
[00078385][12 01][00] device not detected.
[00090971][12 02][00] device not detected.
[00103555][12 03][00] device not detected.
[00116141][15 00][00] device not detected.
[00128723][17 00][00] device not detected.
[00141309][17 01][00] device not detected.
[00153889][19 00][00] device not detected.
[00153974][01 00][00] v1.26.4315 -> v1.26.4315
[00154065][01 01][00] v1.26.4315 -> v1.26.4315
[00154160][08 00][00] v0.10.0.4 -> v0.13.0.7 need upgrade.
[00154289][09 00][00] v0.0.0.0 -> v2.13.0.0 need upgrade.
[00154370]Done.

[00156459]Waiting for user confirm...
[00166547]Timeout, start upgrade automatically.

[00166728]Firmware upgrading[1]...
[00167738][08 00] Firmware upgrade start...
[00014798]========== remo-con disconnect. boot(2) ============
[00014883]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0xb0ce0fc2].
[00014970]Packet upgrade start...

[00015064]Packet checking...
[00015152]Packet vlink 01.06.0040 <-> 01.05.0030.
[00015263]Done.

[00015354]Version checking[1]...
[00027942][03 05][00] device not detected.
[00040523][03 06][00] device not detected.
[00040619][04 00][00] v1.36.0.0 -> v1.41.0.0 need upgrade.
[00053283][11 00][00] device not detected.
[00065869][12 00][00] device not detected.
[00078458][12 01][00] device not detected.
[00091044][12 02][00] device not detected.
[00103627][12 03][00] device not detected.
[00116210][15 00][00] device not detected.
[00128798][17 00][00] device not detected.
[00141376][17 01][00] device not detected.
[00153963][19 00][00] device not detected.
[00154051][01 00][00] v1.26.4315 -> v1.26.4315
[00154133][01 01][00] v1.26.4315 -> v1.26.4315
[00154233][08 00][00] v0.10.0.4 -> v0.13.0.7 need upgrade.
[00154365][09 00][00] v0.0.0.0 -> v2.13.0.0 need upgrade.
[00154451]Done.

[00156549]Waiting for user confirm...
[00166628]Timeout, start upgrade automatically.

[00166789]Firmware upgrading[1]...
[00167786][08 00] Firmware upgrade start...
[00014801]========== remo-con disconnect. boot(2) ============
[00014884]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0xb0ce0fc2].
[00014969]Packet upgrade start...

[00015064]Packet checking...
[00015149]Packet vlink 01.06.0040 <-> 01.05.0030.
[00015263]Done.

[00015352]Version checking[1]...
[00027942][03 05][00] device not detected.
[00040522][03 06][00] device not detected.
[00040619][04 00][00] v1.36.0.0 -> v1.41.0.0 need upgrade.
[00053212][11 00][00] device not detected.
[00065797][12 00][00] device not detected.
[00078383][12 01][00] device not detected.
[00090972][12 02][00] device not detected.
[00103559][12 03][00] device not detected.
[00116150][15 00][00] device not detected.
[00128730][17 00][00] device not detected.
[00141316][17 01][00] device not detected.
[00153908][19 00][00] device not detected.
[00153991][01 00][00] v1.26.4315 -> v1.26.4315
[00154076][01 01][00] v1.26.4315 -> v1.26.4315
[00154181][08 00][00] v0.10.0.4 -> v0.13.0.7 need upgrade.
[00154297][09 00][00] v0.0.0.0 -> v2.13.0.0 need upgrade.
[00154382]Done.

[00156470]Waiting for user confirm...
[00166556]Timeout, start upgrade automatically.

[00166833]Firmware upgrading[1]...
[00167830][08 00] Firmware upgrade start...
[00014802]========== remo-con disconnect. boot(2) ============
[00014887]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0xb0ce0fc2].
[00014976]Packet upgrade start...

[00015072]Packet checking...
[00015158]Packet vlink 01.06.0040 <-> 01.05.0030.
[00015277]Done.

[00015357]Version checking[1]...