When I went outside to fly my P3P this morning, I had no video feed. Having been through this before, the prime suspect was that DJI had done a firmware revision. Got on my computer, saw the new firmware upgrades, downloaded the new firmware onto micro-SD and installed it by putting the card into my P3P and turning it on. The first time it didn't work because the previous firmware was still on the card. After deleting the previous firmware, the upgrade went fine.

Then, uninstalled the existing version of DJI Go on my Google Nexus 7 II, went to the Play Store and downloaded DJI Go. There's never any indication in the Play Store regarding what version of DJI Go is there. The only way to know is to uninstall and reinstall, then check the version.

So, after doing that, I had video back, and here's my first flight with the newest firmwares:

Actually hit 35 mph when I had a tailwind. No problems with flight.

Haven't updated my P3S yet. Shoot, haven't flown it for at least a month because I always choose to fly my P3P.

After the firmware upgrade (P3P) I was one of the lucky ones to get the vibration issue while hovering. It's really scary. Let me be clear on this though; it doesn't vibrate all the time, but when it does you can see and hear it from 10+ meters away. I might have to downgrade the firmware if DJI doesn't address this issue soon enough. This problem appears on P3S as well. There is a video of the phenomenon here http://forum.dji.com/thread-46030-1-1.html if you like to see.

HAVENT FLOWN YET AFTER THE UP DATE. BUT EVERY THING SEEMED TO GO WELL. IF WIND DIES DOWN TOMRROW ILL BE TRING IT OUT. IM GETTING ITCHY BEEN WINDY IN BRANSON MO.

Not A Speck Of  Posted at 2016-3-20 02:56
All that tells you is that Jackson isn't watching the forums. We know that other DJI people are.

Shame they will not help us then as I have not heard anything from them re. The loss of video feed after the update.

Look at this vibration i got after the update:


Really, the image is unusable now..

I do need to try and calibrate. will let you guys now if it solved anything

sanderbergers Posted at 2016-3-20 10:41
Look at this vibration i got after the update:

Hi Sanderbergers,

Recalibrating the IMU will not fix the issue,  at least it did not for me. I've already tried that. The vibrations persists. What i'm worrying about is that these vibrations could harm the hardware. I also believe that many others may have this issue as well but they haven't noticed it yet, as it comes and goes randomly while the aircraft is hovering. But we'll know that soon enough.

hello bigbells, thanks for the explanations. Anyway it s still not working
i've removed dji go app from my tablet (Samsung Tab 3 4G edition SM-T315 , Android 4.4.2), downgraded the drone (Phantom 3 Advanced)  to 1.6, then to 1.7, re-installed DJI Go App, still the same issue :
black screen instead of live feed:


The tablet is connected to the Remote Control, there is full signal on remote control icon (right to "safe to fly (gps), there is full signal on HD logo, anyway when a click on HD (image transmission settings), there a sometimes a red bar, sometime blue point, but to "wave" on every channel :



do someone has any idea ?
unfortunately I m not able to downgrade the apk ... and my drone seems to be blind  (i can still take picture on sd card anyway) so I cannot use it right now...

Eric
ps : log of the upgrade :

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.06.0040.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.19 14:25:53 =====================
Packet: P3S_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:10 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.19 17:19:43 =====================
Packet: P3S_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.20 09:29:54 =====================
Packet: P3S_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.06.0040.bin
Upgrading ...
Result: Success.

========== 2016.03.20 09:53:55 =====================
Packet: P3S_FW_V01.07.0060.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:10 remo-con disconnect======
Packet: P3S_FW_V01.06.0040.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Upgrading ...
Result: Success.

donald.a.gardne Posted at 2016-3-20 01:36
More info please if you got a solution to this.  I am also using a Samsung Tab3 (T310).  Following ...

hello Donald,
I ve no solution yet. I ve tried several things (firmware upgrade/downgrade, APK uninstall/reinstall , camera config ntsc/pal) but still the same problem. I hope DJI support will help us on this.
I understand Samsung Tab 3 is not on devices tested by DJI, anyway I've a Galaxy Note 4 (in the list) it has never worked (still "disconnected").
On my Note 4, there are plenty APK installed, it has been encrypted to, maybe a program blocks DJI connection ... but  on Tab 3 I have less than 10 apk installed (for the moment, I haven't resest to default config the tab, because I've a game with local saves ans don t want to loose it ...).
LAst of all, on my girlfriend's Samsung S6 edge , DJI connection is ok, Live feed is ok ...  

microcyb Posted at 2016-3-18 04:27
Ah man, I want that upgrade!

Nawww. That one has maintenance issues as well.
Money. Those rockets cost an arm and a leg.....

superik.nice Posted at 2016-3-20 11:35
hello Donald,
I ve no solution yet. I ve tried several things (firmware upgrade/downgrade, APK uni ...

Thanks for your update.  I have since tried putting firmware on aircraft back to P3X_FW_V01.06.0040.  Live video link still does not work.  I checked if the camera itself was ok by taking a picture then checking the SD card to see if anything captured - it worked.  So camera seems fine but live feed not.  I welcome any new ideas you come up with.  I am really stuck now. (What firmware version do you have on the controller and what Android version on your tablet and your girlfriends tablet?  I am on 4.2.2 )

donald.a.gardne Posted at 2016-3-20 16:19
Thanks for your update.  I have since tried putting firmware on aircraft back to P3X_FW_V01.06.004 ...

I ' ve performed another thing : restoring default config on the tab. then I've tried to install dji Go app ... it was not available on the market ! I think the app hasn't been autorized for the tab 3 now ...
By the way I've copied the apk from another device and installed to the tab : still the problem ...

My girlfriend has a S6 Edge, running Lollipop (android 5).
My tab 3 has Android 4.4.2 (kitkat) like yours.

I've sent a mail to dji support, I hope they will find a solution.
Last chance : I will try to upgrade the tab 3 to Lollipop (using Cyanogen Mod -  it s an unofficial android version), but is not easy (and I prefere the original android on my tab) .

Regards,
Eric

One thing I have noticed since the fw update is that my home point sets much quicker and  I feel more confident that it has recorded it.

donald.a.gardne Posted at 2016-3-20 10:19
Thanks for your update.  I have since tried putting firmware on aircraft back to P3X_FW_V01.06.004 ...

Donald , View the hidden files on the SD card.  Simply take the SD card that you used for the update and plug it into your computer.  Let me know what it says on line 0800 and 1500.  Follow my link below on how to view hidden files, it will help diagnose your video problem.  If you dont have that SD card still , simply load the CURRENT Firmware that you have loaded in your aircraft and load it again to the SD card and place in the aircraft as if to update the aircraft.  The aircraft will go through a brief startup procedure and then go to standby.  After that simply remove the SD card and place in your PC and then follow my directions on how to view the Hidden files.  it will tell if the problem is serious and need to go in or if there is another problem lurking in the backround.  

http://forum.dji.com/thread-44546-1-1.html

Just updated P3P.  No issues.   Took it out in gusty wind (23+ mpg) and was fairly stable.  Hovering did shift about 2 ft in direction but overall very stable.  Tried follow me and had no issues!    Did not recalibrate IMU but did calibrate compass.    so far...happy flyer here!

Donnie Posted at 2016-3-20 18:29
Donald , View the hidden files on the SD card.  Simply take the SD card that you used for the upda ...

hello Donnie,
below is the end of my P3S_FW_LOG_AB.txt log (in MISC/LOG). There are less than 800 lines (so I've copied a few boot).
I ve tested the ne firmware, with Samsung Tab 3 (still no live feed). it seems there are some "lags", as soon as I push a button (in the menu, even in fly modes), it takes a time (less than 3 seconds, but it seems too long) - it s a different behaviour than previous firmware (everythings were good, response time was ok).

Eric
ps : extrat of log file


[00012248]========== remo-con disconnect. boot(15) ============
[00012306]Packet [C:\P3S_FW_V01.07.0060.bin] detected, card sn [0x008d0faa].
[00012369]Packet upgrade start...

[00012444]Packet checking...
[00012505]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012566]Record vlink 01.07.0060 <-> 01.06.0040 (flow = 0).
[00012634]Done.

[00012696]Version checking[1]...
[00012817][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012917][03 06][00] v2.4.13.0 -> v2.4.13.0
[00012987][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013131][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013240][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013360][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013486][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013618][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013681][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013800][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013960][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014046][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014113][01 00][00] v1.22.4095 -> v1.23.4920 need upgrade
[00014174][01 01][00] v1.22.4095 -> v1.23.4920 need upgrade
[00014251][09 00][00] v2.13.0.0 -> v2.13.0.0
[00014307]Done.

[00016367]Waiting for user confirm...
[00026435]Timeout, start upgrade automatically.

[00026558]Firmware upgrading[1]...
[00041323][01 00] Firmware upgrade start...
[00011734][01 00] Firmware upgrade finished successfully.
[00011798]Done.

[00011858]Packet [C:\P3S_FW_V01.07.0060.bin] resumed, card sn [0x008d0faa].
[00011928]Packet vlink 01.07.0060 <-> 01.06.0040.
[00011993]Record vlink 01.07.0060 <-> 01.06.0040 (flow = 0).
[00012165]Version checking[2]...
[00012272][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012399][03 06][00] v2.4.13.0 -> v2.4.13.0
[00012472][04 00][00] v1.41.0.0 -> v1.41.0.0
[00012613][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012742][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012862][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013014][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013113][12 03][00] v1.10.0.0 -> v1.10.0.0
[00017694][15 00][00] v1.1.2.0 -> v1.1.2.0
[00017817][17 00][00] v1.1.1.7 -> v1.1.1.7
[00017982][17 01][00] v1.0.2.7 -> v1.0.2.7
[00018067][19 00][00] v255.255.255.254 -> v1.0.8.96
[00018139][01 00][05] v1.23.4920 -> v1.23.4920
[00018199][01 01][00] v1.22.4095 -> v1.23.4920 need upgrade
[00018287][09 00][00] v2.13.0.0 -> v2.13.0.0
[00018353]Done.

[00018418]Firmware upgrading[2]...
[00018621][01 01] Firmware upgrade start...
[00048992][01 01] Firmware upgrade finished successfully.
[00049059]Done.

[00049125]Version checking[3]...
[00049235][03 05][00] v34.2.0.9 -> v34.2.0.9
[00049336][03 06][00] v2.4.13.0 -> v2.4.13.0
[00049403][04 00][00] v1.41.0.0 -> v1.41.0.0
[00049536][11 00][00] v1.7.15.1 -> v1.7.15.1
[00049649][12 00][00] v1.10.0.0 -> v1.10.0.0
[00049775][12 01][00] v1.10.0.0 -> v1.10.0.0
[00049884][12 02][00] v1.10.0.0 -> v1.10.0.0
[00050004][12 03][00] v1.10.0.0 -> v1.10.0.0
[00050069][15 00][00] v1.1.2.0 -> v1.1.2.0
[00050183][17 00][00] v1.1.1.7 -> v1.1.1.7
[00050344][17 01][00] v1.0.2.7 -> v1.0.2.7
[00050429][19 00][00] v255.255.255.254 -> v1.0.8.96
[00050497][01 00][05] v1.23.4920 -> v1.23.4920
[00050562][01 01][05] v1.23.4920 -> v1.23.4920
[00050649][09 00][00] v2.13.0.0 -> v2.13.0.0
[00050713]Packet upgrade finish successfully.



[00012629]========== remo-con disconnect. boot(15) ============
[00012684]Packet [C:\P3S_FW_V01.07.0060.bin] detected, card sn [0xcce88943].
[00012741]Packet upgrade start...

[00012799]Packet checking...
[00012863]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012918]Record vlink 01.07.0060 <-> 01.06.0040 (flow = 0).
[00013063]Done.

[00013118]Version checking[1]...
[00013215][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013315][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013388][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013515][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013630][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013755][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013856][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013961][12 03][00] v1.10.0.0 -> v1.10.0.0
[00018526][15 00][00] v1.1.2.0 -> v1.1.2.0
[00018620][17 00][00] v1.1.1.7 -> v1.1.1.7
[00018762][17 01][00] v1.0.2.7 -> v1.0.2.7
[00018840][19 00][00] v255.255.255.254 -> v1.0.8.96
[00018896][01 00][00] v1.23.4920 -> v1.23.4920
[00018957][01 01][00] v1.23.4920 -> v1.23.4920
[00019040][09 00][00] v2.13.0.0 -> v2.13.0.0
[00019096]Packet upgrade cancelled at version checking.

superik.nice Posted at 2016-3-20 13:15
hello Donnie,
below is the end of my P3S_FW_LOG_AB.txt log (in MISC/LOG). There are less than 800  ...

Ok , you are having trouble as well with no video on your phantom pro is that correct?  Does the camera record on the SD card no problem ?  Also the good news if the file you provided was at the end of the log i see NO corruption of lines 0800 and 1500  this is good.  If you have poor video reception I would change your device to and I-pad if possible (DJI makes things work best with the Ipad)   also check the USB output on the back of the transmitter for damage. Make sure you have enabled" hardware decode" on the Go app.  Make sure you clear the" video cache" on the GO app as well  Both of these will take some stress off the processor.  Change cables from the device to the RC transmitter these are notorious for causing grief.    Also simply delete the GO complete and Re-Install.  I am giving some general advice here for lagging video signal .  

Please let me know what problem you are experiencing, I will try and help, did this come about only after the update ?  was everything perfect before ?
Edit ****Is the device you are using compatible ?  If not I think you are spinning your wheels,  It may work but it will never be perfect. From the files you provided me there is nothing wrong with your video transmission board.  You have a DEVICE problem and more than likely not a DJI problem,  I would not keep upgrading  and downgrading firmware that is just going to mess something up.  My advise would be to invest in the Apple I -pad, this would give the best vido with the least amount of lag.  A fellow on you-tube did a test and the Apple devices came in first place.    good luck

_donnie  

Donnie Posted at 2016-3-20 19:30
Ok , you are having trouble as well with no video on your phantom pro is that correct?  Does the c ...

Hi Donnie,
thanks for the reply.
I've posted here some info, on my firmware, screenshot ... :
my post
so it was OK (live view, record ... , response time on menu)  before the upgrade, on my Samsung Tab 3.
Now, there is no live feed, but I can take pictures (and movie) without any problem.
I have no ipad, by the way I've tested with a Samsung Galaxy 6 edge and live feed is ok. (so my quadcopter, my usb cable and a 2nd usb cable tested and the remote control are OK).
In my previous post, I show there are no "green point" (no point in fact), on image transmission settings. With the S6 Edge, I see a few green points / bars.

It seems something is not supported on my tab / android version.

I can't see the hardware acceleration button.
I've unchecked video cache,
For info, I can't setup the image transmission channel (I've seen such choice on a forum, but it s not available)
I've restore the tablet to default config (so no 3rd party app can disturb DJI Go)
A 2nd usb cable has been tested too.
I've changed the video size (not sure if it has an impact on live feed), and the  NTSC and PAL option

I haven't tested on Ltchi yet, I will try it later and keep you informed.

Eric

superik.nice Posted at 2016-3-20 14:10
Hi Donnie,
thanks for the reply.
I've posted here some info, on my firmware, screenshot ... :

  Yes, sorry to say I think it is your device,  I have seen many complaints about Samsung Devices and compatibility issues.   FYI  "Enable hardware Decode " would be under "General Settings" just below the "you tube stream" option. Tell your Girlfriend you want a new I-Pad for a gift.  You will be amazed once you have the system optimized. Also you can do the 32 channel hack and it makes reception ( and distance ) even better, I would not waste your time doing it with the Samsung device.  
****Dont check video cache....CLEAR VIDEO CACHE   make sure no apps running in backround as well , you could try like an airplane mode and see if it helps, you may loose map feature though.  

good Luck - donnie

Donnie Posted at 2016-3-20 20:28
Yes, sorry to say I think it is your device,  I have seen many complaints about Samsung Devices a ...

I will tell her to offer me a new i pad, anyway I'm sure she will disagree ;) (unless I buy her a new diamond - maybe I will ask dji to help me with this ;) ). My pc runs  linux ... Apple has never be nice with me (I had an Ipod few years ago, it was really a nightmare to update my music library, I had to jailbrake the Ipod, change the default database ... )

I've tried litchi, and it 's working well (at the begining there was a black screen too, but after switching from photo / camera I've seen live feed).

I think I have to wait for a dji go app upgrade ... (or switching to litchi if nothing happens).

Thanks for your messages,
Eric
[edit] ps : I've clear cache and used airplane mode, still black screen

This is the problem I have after updating my P3 advanced:

superik.nice Posted at 2016-3-20 20:04
I will tell her to offer me a new i pad, anyway I'm sure she will disagree ;) (unless I buy her a n ...

I have exactly the same problem as Superik.nice.  I have a Samsung Tab 3 8.0 (T310) and it has been working perfectly on the v2.6.0 Tablet App.  DJI state that they are trying to get more android devices to work and I know they don't show this particular Tablet on there list but it did work.  Also with the 8 inch screen I got a very quality live image from the p3 Advanced.  I never expected that v2.7.0 (a forced) software update would stop my live feed video from working.  What a backward step.  In addition I don't even have the choice of going back to the v2.6.0 App.  I also don't think the answer of getting an Ipad is valid.  Neither do I want Apple and certainly do not want the extra expense.  Come on DJI lets not go backwards, please try to find a solution to get our Tab 3 8.0 (T310) to work again.  I wouldn't have minded if it hadn't of worked in the first place.

superik.nice Posted at 2016-3-20 20:04
I will tell her to offer me a new i pad, anyway I'm sure she will disagree ;) (unless I buy her a n ...

Donnie,

if I had a girlfriend that would buy me an Ipad I think my wife would have something to say.  I don't think a girlfriend is an option.  Even when I bought the P3P my wife raised an eyebrow and insisted that I got her an exercise machine - so I bought her a vacuum cleaner...but she says she does not do technology.  I only bought it because I come from a competitive family and my brother bought the advance - so I bought the pro.  Then I realised I didn't have a 4k television to watch the footage.  Managed to persuade my loving wife this was necessary ...so got a 65" curved screen - needed the immersive experience of course.  But now you say I need an iPad.  Need your help to explain that one to her!

Right now I am trying to get the log you asked for Donnie - I had already dropped back to 1.6 but am now upgrading back to 1.7 with a clean SD card and on the firmware file.  

Like Eric,  I could not see the hardware decode option.  I looked it up on the net and found the following link,   But this is not what I see on the DJI menu now; under general settings under Camera there is "Youtube Live Streaming" and further down Video Cache (Cache locally when recording and auto clean-up video cache options).  No hardware decode.

Will keep you posted on the upgrade.  

Donald

mizzle09 Posted at 2016-3-19 13:11
Just came back from a short flight, I had the same problem.

Me as well. I've had to resort to the old method of re-landing and taking off again just to re-set the home-point, which is annoying.

Just did the update on my DJI Phantom 3 4K with no problems or issues to report :-)

Not A Speck Of  Posted at 2016-3-20 23:16
Me as well. I've had to resort to the old method of re-landing and taking off again just to re-set ...

hello,
even if the live feed isn't available, I can use the samasung tab 3 to set the home point.
2 days ago, I've used the phantom without the tablet, just with the  remote control. I've tried to shut down the motors using the 2 sticks (the left one : on the bottom right corner, the right one : on the bottom left corner). Anyway the phantom has turned over (upside down). There was a strange sound like a baby/pet crying. I had to take it manually on the normal side, and try to shut down again but it wasn't easy (I have changed the 4 propellers because they have been damaged).
I've read on the new firmware, there is a new mode for shutting down the motors : Home + left stick down, but I haven't tried.

superik.nice Posted at 2016-3-21 08:55
hello,
even if the live feed isn't available, I can use the samasung tab 3 to set the home point.
...

The Litchi app looks good but they tell me that the Tab 3 8.0 isn't powerful enough to run the app. Is this true?  If it does work is the live feed successful?

superik.nice Posted at 2016-3-21 16:55
hello,
even if the live feed isn't available, I can use the samasung tab 3 to set the home point.
...

This mode to turn off the motors is only for the Phantom 4. On landing you should just keep the left stick down for 3 seconds when it thouch the ground and it will not flip.

superik.nice Posted at 2016-3-20 11:35
hello Donald,
I ve no solution yet. I ve tried several things (firmware upgrade/downgrade, APK uni ...

Samsung Galaxy Tab 3 is a LOW power tablet - single core CPU and small memory - it will not run DJI Go FPV/Follow view while recording ... I know, because I have one and whilst it works fine for a few minutes seeing what the drone sees, as soon as you start video or stills capture, or switch from still to video or vice versa, the app gets a black screen.

The fix I found was to go buy a new Samsung S2 tablet - octa-core CPU and lots of memory (for running apps, not storage memory) - DJI Go has had no problems since then.  Plus, the S2 is about a quarter the weight of the Tab 3 ... and that makes one heck of a handling difference when in the field flying.

Honestly - keep the Tab 3 for games etc.  but get a higher spec tablet for flying your drone.

Old Geezer Posted at 2016-3-21 11:35
Samsung Galaxy Tab 3 is a LOW power tablet - single core CPU and small memory - it will not run DJ ...

I see your point but the Tab 3 using the 2.6.0 app gave me none of the problems you have mentioned. The live video was always smooth and faultless.  I don't want the expense of having to change a good working tablet when an update now stops it from working.

martinpamor Posted at 2016-3-21 11:43
The Litchi app looks good but they tell me that the Tab 3 8.0 isn't powerful enough to run the app ...

hello,
I've tested Litchi only few minutes, in my room (the drone was not flying ), the live feed was ok.
If there is no dji go fix next week, I will by the litchi app and test it further.

I understand Old Geezer message, about buying a new efficient tablet for sure it will be the best ... anyway  I had no problem with my tab3 (like Martinpamor), it's not heavy (like my previous TAB1 10 inches) - I use the tab only for the drone... otherwise we could consider DJI to sell the tab (or a remote control with touch screen included), to be sure everythings are ok.

I don't need the follow me function (I haven't tested on previous firmware) - I think it s better on phantom 4, with the follow me stick you can leave in your pocket (as I've understood), other functions were ok (with previous firmware).

Eric

superik.nice Posted at 2016-3-21 01:55
hello,
even if the live feed isn't available, I can use the samasung tab 3 to set the home point.
...

"I've read on the new firmware, there is a new mode for shutting down the motors : Home + left stick down, but I haven't tried."

But of course, the old and new CSC methods are both just emergency shut downs and you shouldn't use either of them in normal circumstances.

After landing, just hold the left stick down for up to 3 seconds and the motors will stop.

will i have probleme if i dont do the new upgrate fast. because i see a lot of probleme and go on a trip nest week and want to bring my P3P whith me so, no time to send it to repair before my trip if i have issue whith the upgrade.  i leave for a month and think doing the upgrade after that trip

martinpamor Posted at 2016-3-21 13:12
I see your point but the Tab 3 using the 2.6.0 app gave me none of the problems you have mentioned ...

You were lucky if you got the Tab 3 to work with live view.

With mine, as I said, provided I did not switch camera mode I could get at best 5 minutes of live view if I kept the aircraft very close to me.  Otherwise, as soon as I hit around 25 metres horizontal distance the video link was lost.  This was with both 2.6.0 and 2.6.1

Now, just by changing the tablet I am enjoying full functionality on 2.6.1 with no loss of live view at any distance or height flown so far.

bluesky skydive Posted at 2016-3-21 16:20
will i have probleme if i dont do the new upgrate fast. because i see a lot of probleme and go on a  ...

I would be careful not to turn on your WiFi, as I did this on my S4 mini and it automatically updated to the new dji go v2.7.0.  Luckily that phone works with the new update.  But it was a pity as I had the idea of copying the v2.6.0 files from my S3 mini phone to my Tab 3 so to try to go back to the older v2.6.0 app.

DJI-Ken Posted at 2016-3-16 18:29
I'm sorry you are having an issue.
Can you post the hidden log file.
Windows system :

[00012244][01 00] Firmware upgrade finished successfully.
[00012342]Done.

[00012378]Packet [C:\P3X_FW_V01.02.0006.bin] resumed, card sn [0x78007c1e].
[00012414]Version checking[2]...
[00012478][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012538][03 06][00] v2.1.6.18 -> v2.2.6.8 need upgrade.
[00012574][04 00][00] v1.36.0.0 -> v1.38.0.0 need upgrade.
[00012622][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012737][11 00][00] v1.6.0.0 -> v1.6.0.0
[00012807][12 00][00] v1.8.0.0 -> v1.8.0.0
[00012883][12 01][00] v1.8.0.0 -> v1.8.0.0
[00012972][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013052][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013177][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013266][17 00][00] v1.1.1.2 -> v1.1.1.6 need upgrade.
[00013382][17 01][00] v1.0.2.4 -> v1.0.2.5 need upgrade.
[00013422][19 00][00] v1.0.8.59 -> v1.0.8.96 need upgrade.
[00013454][01 00][05] v1.15.3056 -> v1.15.3056
[00013486][01 01][00] v1.6.2736 -> v1.15.3056 need upgrade
[00013523][08 00][00] v0.11.0.4 -> v0.11.0.4
[00013554]Done.

[00013585]Firmware upgrading[2]...
[00013736][01 01] Firmware upgrade start...
[00043968][01 01] Firmware upgrade finished successfully.
[00044024][17 00] Firmware upgrade start...
[00136409][17 00] Firmware upgrade finished successfully.
[00136451][17 01] Firmware upgrade start...
[00201952][17 01] Firmware upgrade finished successfully.
[00201998][03 05] Firmware upgrade start...
[00273252][03 05] Firmware upgrade finished successfully.
[00273477][03 06] Firmware upgrade start...
[00580744][03 06] Firmware upgrade finished successfully.
[00584057][19 00] Firmware upgrade start...
[00751253][19 00] Firmware upgrade finished successfully.
[00751314][04 00] Firmware upgrade start...
[00809390][04 00] Firmware upgrade finished successfully.
[00809432]Done.

[00809469]Version checking[3]...
[00809533][03 05][05] v34.2.0.9 -> v34.2.0.9
[00809593][03 06][05] v2.2.6.8 -> v2.2.6.8
[00809636][04 00][05] v1.38.0.0 -> v1.38.0.0
[00809682][09 00][00] v1.7.0.3 -> v1.7.0.3
[00809873][11 00][00] v1.6.0.0 -> v1.6.0.0
[00809943][12 00][00] v1.8.0.0 -> v1.8.0.0
[00810037][12 01][00] v1.8.0.0 -> v1.8.0.0
[00810133][12 02][00] v1.8.0.0 -> v1.8.0.0
[00810207][12 03][00] v1.8.0.0 -> v1.8.0.0
[00810382][15 00][00] v1.1.2.0 -> v1.1.2.0
[00810463][17 00][05] v1.1.1.6 -> v1.1.1.6
[00810588][17 01][05] v1.0.2.5 -> v1.0.2.5
[00810643][19 00][05] v1.0.8.96 -> v1.0.8.96
[00810687][01 00][05] v1.15.3056 -> v1.15.3056
[00810724][01 01][05] v1.15.3056 -> v1.15.3056
[00810772][08 00][00] v0.11.0.4 -> v0.11.0.4
[00810810]Packet upgrade finish successfully.



[00012680]========== 2015.08.17 18:31:20. boot(15) ============
[00012721]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012760]Packet upgrade start...

[00012810]Packet checking...
[00012850]Done.

[00012891]Version checking[1]...
[00012988][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013068][03 06][00] v2.2.6.8 -> v2.2.6.19 need upgrade.
[00013120][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00013177][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013306][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00013402][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013478][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013580][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013677][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013814][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013892][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00014021][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00014080][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014122][01 00][00] v1.15.3056 -> v1.23.3419 need upgrade
[00014167][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00014214][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00014254]Done.

[00016294]Waiting for user confirm...
[00026329]Timeout, start upgrade automatically.

[00026406]Firmware upgrading[1]...
[00038338][01 00] Firmware upgrade start...
[00012244][01 00] Firmware upgrade finished successfully.
[00012281]Done.

[00012316]Packet [C:\P3X_FW_V01.03.0020.bin] resumed, card sn [0x1890321a].
[00012441]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012504]Version checking[2]...
[00012563][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012622][03 06][00] v2.2.6.8 -> v2.2.6.19 need upgrade.
[00012666][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00012712][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012820][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00012892][12 00][00] v1.8.0.0 -> v1.8.0.0
[00012967][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013038][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013112][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013249][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013309][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00013407][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00013472][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013508][01 00][05] v1.23.3419 -> v1.23.3419
[00013546][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00013588][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00013628]Done.

[00013664]Firmware upgrading[2]...
[00013802][01 01] Firmware upgrade start...
[00044048][01 01] Firmware upgrade finished successfully.
[00044916][08 00] Firmware upgrade start...
[00546345][08 00] Firmware upgrade finished successfully.
[00546406][17 00] Firmware upgrade start...
[00631208][17 00] Firmware upgrade finished successfully.
[00631263][17 01] Firmware upgrade start...
[00695936][17 01] Firmware upgrade finished successfully.
[00695996][11 00] Firmware upgrade start...
[00745688][11 00] Firmware upgrade finished successfully.
[00745921][03 06] Firmware upgrade start...
[01071904][03 06] Firmware upgrade finished successfully.
[01071968][04 00] Firmware upgrade start...
[01131701][04 00] Firmware upgrade finished successfully.
[01131882]Done.

[01132064]Version checking[3]...
[01132275][03 05][00] v34.2.0.9 -> v34.2.0.9
[01132514][03 06][05] v2.2.6.19 -> v2.2.6.19
[01132726][04 00][05] v1.40.0.0 -> v1.40.0.0
[01132778][09 00][00] v1.7.0.3 -> v1.7.0.3
[01132894][11 00][05] v1.7.0.0 -> v1.7.0.0
[01133043][12 00][00] v1.8.0.0 -> v1.8.0.0
[01133143][12 01][00] v1.8.0.0 -> v1.8.0.0
[01133224][12 02][00] v1.8.0.0 -> v1.8.0.0
[01133337][12 03][00] v1.8.0.0 -> v1.8.0.0
[01133493][15 00][00] v1.1.2.0 -> v1.1.2.0
[01133583][17 00][05] v1.1.1.7 -> v1.1.1.7
[01133704][17 01][05] v1.0.2.7 -> v1.0.2.7
[01133758][19 00][00] v1.0.8.96 -> v1.0.8.96
[01133802][01 00][05] v1.23.3419 -> v1.23.3419
[01133843][01 01][05] v1.23.3419 -> v1.23.3419
[01133897][08 00][05] v0.12.0.4 -> v0.12.0.4
[01133939]Packet upgrade finish successfully.



[00012686]========== 2015.08.17 19:09:02. boot(15) ============
[00012727]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012769]Packet upgrade start...

[00012820]Packet checking...
[00012863]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012905]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012948]Done.

[00012989]Version checking[1]...
[00013072][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013151][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013198][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013250][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013370][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013473][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013569][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013669][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013772][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013917][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014000][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014145][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014211][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014255][01 00][00] v1.23.3419 -> v1.23.3419
[00014296][01 01][00] v1.23.3419 -> v1.23.3419
[00014378][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014420]Packet upgrade cancelled at version checking.



[00012703]========== remo-con disconnect. boot(15) ============
[00012745]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012787]Packet upgrade start...

[00012839]Packet checking...
[00012885]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012927]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00013052]Done.

[00013096]Version checking[1]...
[00013170][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013249][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013303][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013374][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013489][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
[00013579][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013655][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013746][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013845][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013975][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014055][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014176][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014235][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014277][01 00][00] v1.23.3419 -> v1.23.3419
[00014319][01 01][00] v1.23.3419 -> v1.23.3419
[00014398][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014437]Done.

[00016480]Waiting for user confirm...
[00026521]Timeout, start upgrade automatically.

[00026600]Firmware upgrading[1]...
[00026661][11 00] Firmware upgrade start...
[00075488][11 00] Firmware upgrade finished successfully.
[00075523]Done.

[00075561]Version checking[2]...
[00075634][03 05][00] v34.2.0.9 -> v34.2.0.9
[00075695][03 06][00] v2.2.6.19 -> v2.2.6.19
[00075743][04 00][00] v1.40.0.0 -> v1.40.0.0
[00075799][09 00][00] v1.7.0.3 -> v1.7.0.3
[00075913][11 00][05] v1.7.0.0 -> v1.7.0.0
[00076003][12 00][00] v1.8.0.0 -> v1.8.0.0
[00076093][12 01][00] v1.8.0.0 -> v1.8.0.0
[00076183][12 02][00] v1.8.0.0 -> v1.8.0.0
[00076274][12 03][00] v1.8.0.0 -> v1.8.0.0
[00076411][15 00][00] v1.1.2.0 -> v1.1.2.0
[00076479][17 00][00] v1.1.1.7 -> v1.1.1.7
[00076629][17 01][00] v1.0.2.7 -> v1.0.2.7
[00076679][19 00][00] v1.0.8.96 -> v1.0.8.96
[00076715][01 00][00] v1.23.3419 -> v1.23.3419
[00076752][01 01][00] v1.23.3419 -> v1.23.3419
[00076798][08 00][00] v0.12.0.4 -> v0.12.0.4
[00076835]Packet upgrade finish successfully.



[00012480]========== remo-con disconnect. boot(15) ============
[00012516]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012619]Packet upgrade start...

[00012662]Packet checking...
[00012698]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012737]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012775]Done.

[00012819]Version checking[1]...
[00012892][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012976][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013020][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013077][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013197][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013311][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013411][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013511][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013611][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013741][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013821][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013942][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013997][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014036][01 00][00] v1.23.3419 -> v1.23.3419
[00014076][01 01][00] v1.23.3419 -> v1.23.3419
[00014128][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014165]Packet upgrade cancelled at version checking.



[00012508]========== 2015.08.19 18:04:11. boot(15) ============
[00012544]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012581]Packet upgrade start...

[00012623]Packet checking...
[00012659]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012696]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012733]Done.

[00012771]Version checking[1]...
[00012838][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012898][03 06][00] v2.2.6.19 -> v2.2.6.19
[00012941][04 00][00] v1.40.0.0 -> v1.40.0.0
[00012988][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013097][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013167][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013268][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013358][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013433][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014262][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014323][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014445][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014507][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014622][01 00][00] v1.23.3419 -> v1.23.3419
[00014660][01 01][00] v1.23.3419 -> v1.23.3419
[00014715][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014753]Packet upgrade cancelled at version checking.



[00012669]========== 2015.08.19 21:05:14. boot(15) ============
[00012714]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012766]Packet upgrade start...

[00012819]Packet checking...
[00012863]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012915]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012964]Done.

[00013006]Version checking[1]...
[00013083][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013163][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013215][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013282][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013564][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013653][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013753][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013854][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013953][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014100][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014194][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014338][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014403][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014451][01 00][00] v1.23.3419 -> v1.23.3419
[00014495][01 01][00] v1.23.3419 -> v1.23.3419
[00014555][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014600]Packet upgrade cancelled at version checking.



[00012482]========== remo-con disconnect. boot(15) ============
[00012526]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012563]Packet upgrade start...

[00012608]Packet checking...
[00012646]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012683]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012722]Done.

[00012759]Version checking[1]...
[00012831][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012910][03 06][00] v2.2.6.19 -> v2.2.6.19
[00012956][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013021][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013132][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013211][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013366][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013446][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013524][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013677][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013761][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013881][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013941][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013980][01 00][00] v1.23.3419 -> v1.23.3419
[00014019][01 01][00] v1.23.3419 -> v1.23.3419
[00014077][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014115]Packet upgrade cancelled at version checking.



[00012499]========== 2015.08.29 22:11:15. boot(15) ============
[00012539]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012577]Packet upgrade start...

[00012624]Packet checking...
[00012664]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012702]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012744]Done.

[00012782]Version checking[1]...
[00012871][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012956][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013003][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013062][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013191][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013302][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013398][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013498][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013599][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013754][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013840][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013975][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014026][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014071][01 00][00] v1.23.3419 -> v1.23.3419
[00014109][01 01][00] v1.23.3419 -> v1.23.3419
[00014163][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014204]Packet upgrade cancelled at version checking.



[00012699]========== remo-con disconnect. boot(15) ============
[00012745]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012789]Packet upgrade start...

[00012848]Packet checking...
[00012896]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012941]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00013077]Done.

[00013126]Version checking[1]...
[00013220][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013320][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013376][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013455][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013580][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013696][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013795][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013895][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013995][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014133][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014257][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014391][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014455][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014499][01 00][00] v1.23.3419 -> v1.23.3419
[00014549][01 01][00] v1.23.3419 -> v1.23.3419
[00014612][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014659]Packet upgrade cancelled at version checking.



[00012798]========== 2015.09.05 17:27:04. boot(15) ============
[00012848]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x1890321a].
[00012894]Packet upgrade start...

[00012950]Packet checking...
[00012996]Packet vlink 01.03.0020 <-> 01.01.0009.
[00013049]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00013095]Done.

[00013143]Version checking[1]...
[00013226][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013307][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013361][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013426][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013552][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013663][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013762][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013862][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013962][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014118][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014216][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014356][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014439][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014483][01 00][00] v1.23.3419 -> v1.23.3419
[00014551][01 01][00] v1.23.3419 -> v1.23.3419
[00014624][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014669]Packet upgrade cancelled at version checking.



[00012791]========== remo-con disconnect. boot(15) ============
[00012901]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012958]Packet upgrade start...

[00013014]Packet checking...
[00013063]Packet vlink 01.04.0010 <-> 01.03.0020.
[00013107]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00013157]Done.

[00013208]Version checking[1]...
[00013296][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013395][03 06][00] v2.2.6.19 -> v2.3.0.13 need upgrade.
[00013450][04 00][00] v1.40.0.0 -> v1.41.0.0 need upgrade.
[00013510][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013636][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013730][12 00][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013830][12 01][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013930][12 02][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00014011][12 03][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00014147][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014225][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014345][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014410][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014460][01 00][00] v1.23.3419 -> v1.23.3419
[00014508][01 01][00] v1.23.3419 -> v1.23.3419
[00014571][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014627]Done.

[00016674]Waiting for user confirm...
[00026717]Timeout, start upgrade automatically.

[00026812]Firmware upgrading[1]...
[00026877][12 00] Firmware upgrade start...
[00090009][12 00] Firmware upgrade finished successfully.
[00090065][12 01] Firmware upgrade start...
[00153227][12 01] Firmware upgrade finished successfully.
[00153283][12 02] Firmware upgrade start...
[00220917][12 02] Firmware upgrade finished successfully.
[00220973][12 03] Firmware upgrade start...
[00285530][12 03] Firmware upgrade finished successfully.
[00285761][03 06] Firmware upgrade start...
[00615304][03 06] Firmware upgrade finished successfully.
[00615374][04 00] Firmware upgrade start...
[00673821][04 00] Firmware upgrade finished successfully.
[00673861]Done.

[00673903]Version checking[2]...
[00674059][03 05][00] v34.2.0.9 -> v34.2.0.9
[00674143][03 06][05] v2.3.0.13 -> v2.3.0.13
[00674198][04 00][05] v1.41.0.0 -> v1.41.0.0
[00674248][09 00][00] v1.7.0.3 -> v1.7.0.3
[00674400][11 00][00] v1.7.0.0 -> v1.7.0.0
[00674499][12 00][05] v1.10.0.0 -> v1.10.0.0
[00674589][12 01][05] v1.10.0.0 -> v1.10.0.0
[00674673][12 02][05] v1.10.0.0 -> v1.10.0.0
[00674753][12 03][05] v1.10.0.0 -> v1.10.0.0
[00674904][15 00][00] v1.1.2.0 -> v1.1.2.0
[00674988][17 00][00] v1.1.1.7 -> v1.1.1.7
[00675108][17 01][00] v1.0.2.7 -> v1.0.2.7
[00675169][19 00][00] v1.0.8.96 -> v1.0.8.96
[00675213][01 00][00] v1.23.3419 -> v1.23.3419
[00675258][01 01][00] v1.23.3419 -> v1.23.3419
[00675311][08 00][00] v0.12.0.4 -> v0.12.0.4
[00675357]Packet upgrade finish successfully.



[00012627]========== remo-con disconnect. boot(15) ============
[00012669]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012711]Packet upgrade start...

[00012759]Packet checking...
[00012803]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012856]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012898]Done.

[00012943]Version checking[1]...
[00013020][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013100][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013150][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013203][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013344][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013433][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013538][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013639][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013738][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013904][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013989][17 00][00] v1.1.1.7 -> v1.1.1.7
[00016614][17 01][00] v1.0.2.7 -> v1.0.2.7
[00016684][19 00][00] v1.0.8.96 -> v1.0.8.96
[00016729][01 00][00] v1.23.3419 -> v1.23.3419
[00016772][01 01][00] v1.23.3419 -> v1.23.3419
[00016822][08 00][00] v0.12.0.4 -> v0.12.0.4
[00016867]Packet upgrade cancelled at version checking.



[00012567]========== 2015.09.07 22:56:25. boot(15) ============
[00012699]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012744]Packet upgrade start...

[00012801]Packet checking...
[00012851]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012896]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012941]Done.

[00012991]Version checking[1]...
[00013081][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013158][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013207][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013278][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013398][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013512][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013607][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013712][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013812][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013992][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014082][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014201][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014298][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014343][01 00][00] v1.23.3419 -> v1.23.3419
[00014392][01 01][00] v1.23.3419 -> v1.23.3419
[00014453][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014498]Packet upgrade cancelled at version checking.



[00012562]========== 2015.09.07 23:01:05. boot(15) ============
[00012605]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012658]Packet upgrade start...

[00012708]Packet checking...
[00012752]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012801]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012847]Done.

[00012893]Version checking[1]...
[00012967][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013042][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013093][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013166][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013282][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
[00013376][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013476][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013576][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013702][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013853][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013945][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014145][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014206][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014277][01 00][00] v1.23.3419 -> v1.23.3419
[00014330][01 01][00] v1.23.3419 -> v1.23.3419
[00014393][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014439]Done.

[00016490]Waiting for user confirm...
[00026534]Timeout, start upgrade automatically.

[00026620]Firmware upgrading[1]...
[00026678][11 00] Firmware upgrade start...
[00072961][11 00] Firmware upgrade finished successfully.
[00073006]Done.

[00073057]Version checking[2]...
[00073148][03 05][00] v34.2.0.9 -> v34.2.0.9
[00073227][03 06][00] v2.3.0.13 -> v2.3.0.13
[00073288][04 00][00] v1.41.0.0 -> v1.41.0.0
[00073359][09 00][00] v1.7.0.3 -> v1.7.0.3
[00073488][11 00][05] v1.7.0.0 -> v1.7.0.0
[00073598][12 00][00] v1.10.0.0 -> v1.10.0.0
[00073698][12 01][00] v1.10.0.0 -> v1.10.0.0
[00073800][12 02][00] v1.10.0.0 -> v1.10.0.0
[00073913][12 03][00] v1.10.0.0 -> v1.10.0.0
[00074057][15 00][00] v1.1.2.0 -> v1.1.2.0
[00074151][17 00][00] v1.1.1.7 -> v1.1.1.7
[00074296][17 01][00] v1.0.2.7 -> v1.0.2.7
[00074356][19 00][00] v1.0.8.96 -> v1.0.8.96
[00074402][01 00][00] v1.23.3419 -> v1.23.3419
[00074450][01 01][00] v1.23.3419 -> v1.23.3419
[00074503][08 00][00] v0.12.0.4 -> v0.12.0.4
[00074555]Packet upgrade finish successfully.



[00012575]========== 2015.09.07 23:06:36. boot(15) ============
[00012627]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012672]Packet upgrade start...

[00012724]Packet checking...
[00012769]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012820]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012866]Done.

[00012912]Version checking[1]...
[00012996][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013076][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013138][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013199][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013335][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
[00013429][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013530][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013709][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013809][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013960][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014039][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014159][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014220][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014300][01 00][00] v1.23.3419 -> v1.23.3419
[00014348][01 01][00] v1.23.3419 -> v1.23.3419
[00014403][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014451]Done.

[00016503]Waiting for user confirm...
[00026547]Timeout, start upgrade automatically.

[00026643]Firmware upgrading[1]...
[00026697][11 00] Firmware upgrade start...
[00074871][11 00] Firmware upgrade finished successfully.
[00074917]Done.

[00074964]Version checking[2]...
[00075040][03 05][00] v34.2.0.9 -> v34.2.0.9
[00075140][03 06][00] v2.3.0.13 -> v2.3.0.13
[00075199][04 00][00] v1.41.0.0 -> v1.41.0.0
[00075284][09 00][00] v1.7.0.3 -> v1.7.0.3
[00075401][11 00][05] v1.7.0.0 -> v1.7.0.0
[00075488][12 00][00] v1.10.0.0 -> v1.10.0.0
[00075588][12 01][00] v1.10.0.0 -> v1.10.0.0
[00075688][12 02][00] v1.10.0.0 -> v1.10.0.0
[00075788][12 03][00] v1.10.0.0 -> v1.10.0.0
[00075954][15 00][00] v1.1.2.0 -> v1.1.2.0
[00076049][17 00][00] v1.1.1.7 -> v1.1.1.7
[00076164][17 01][00] v1.0.2.7 -> v1.0.2.7
[00076244][19 00][00] v1.0.8.96 -> v1.0.8.96
[00076289][01 00][00] v1.23.3419 -> v1.23.3419
[00076336][01 01][00] v1.23.3419 -> v1.23.3419
[00076407][08 00][00] v0.12.0.4 -> v0.12.0.4
[00076456]Packet upgrade finish successfully.



[00012655]========== 2015.09.07 23:09:00. boot(15) ============
[00012701]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012748]Packet upgrade start...

[00012803]Packet checking...
[00012850]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012898]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012943]Done.

[00012996]Version checking[1]...
[00013067][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013148][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013200][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013358][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013488][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013578][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013680][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013777][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013879][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014023][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014116][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014278][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014348][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014395][01 00][00] v1.23.3419 -> v1.23.3419
[00014443][01 01][00] v1.23.3419 -> v1.23.3419
[00014504][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014554]Packet upgrade cancelled at version checking.



[00012591]========== 2015.09.07 23:30:16. boot(15) ============
[00012643]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012691]Packet upgrade start...

[00012744]Packet checking...
[00012796]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012844]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012892]Done.

[00012940]Version checking[1]...
[00013044][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013142][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013196][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013280][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013423][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013542][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013628][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013724][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013814][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013963][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014044][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014237][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014305][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014354][01 00][00] v1.23.3419 -> v1.23.3419
[00014403][01 01][00] v1.23.3419 -> v1.23.3419
[00014463][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014510]Packet upgrade cancelled at version checking.



[00012603]========== 2015.09.07 23:31:45. boot(15) ============
[00012657]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012704]Packet upgrade start...

[00012844]Packet checking...
[00012893]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012942]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012996]Done.

[00013043]Version checking[1]...
[00013124][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013204][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013268][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013350][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013484][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013583][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013692][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013792][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013892][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014050][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014172][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014312][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014387][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014436][01 00][00] v1.23.3419 -> v1.23.3419
[00014491][01 01][00] v1.23.3419 -> v1.23.3419
[00014547][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014595]Packet upgrade cancelled at version checking.



[00012618]========== 2015.09.07 23:32:31. boot(15) ============
[00012674]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012722]Packet upgrade start...

[00012775]Packet checking...
[00012829]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012877]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012928]Done.

[00012981]Version checking[1]...
[00013079][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013179][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013248][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013317][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013438][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013547][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013647][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013747][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013847][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014023][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014128][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014266][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014337][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014385][01 00][00] v1.23.3419 -> v1.23.3419
[00014507][01 01][00] v1.23.3419 -> v1.23.3419
[00014573][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014629]Packet upgrade cancelled at version checking.



[00012627]========== 2015.09.07 23:33:52. boot(15) ============
[00012675]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012725]Packet upgrade start...

[00012779]Packet checking...
[00012834]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012883]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012932]Done.

[00012984]Version checking[1]...
[00013076][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013177][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013247][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013312][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013460][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013571][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013670][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013770][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013891][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014059][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014166][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014300][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014372][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014424][01 00][00] v1.23.3419 -> v1.23.3419
[00014478][01 01][00] v1.23.3419 -> v1.23.3419
[00014540][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014590]Packet upgrade cancelled at version checking.



[00012667]========== 2015.09.07 23:35:47. boot(15) ============
[00012716]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012765]Packet upgrade start...

[00012823]Packet checking...
[00012871]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012920]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012976]Done.

[00013028]Version checking[1]...
[00013101][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013183][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013251][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013316][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015947][11 00][00] v1.7.0.0 -> v1.7.0.0
[00016059][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016155][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016370][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016472][12 03][00] v1.10.0.0 -> v1.10.0.0
[00016630][15 00][00] v1.1.2.0 -> v1.1.2.0
[00016732][17 00][00] v1.1.1.7 -> v1.1.1.7
[00016872][17 01][00] v1.0.2.7 -> v1.0.2.7
[00016936][19 00][00] v1.0.8.96 -> v1.0.8.96
[00016987][01 00][00] v1.23.3419 -> v1.23.3419
[00017038][01 01][00] v1.23.3419 -> v1.23.3419
[00017096][08 00][00] v0.12.0.4 -> v0.12.0.4
[00017150]Packet upgrade cancelled at version checking.



[00012636]========== remo-con disconnect. boot(15) ============
[00012686]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012738]Packet upgrade start...

[00012798]Packet checking...
[00012845]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012897]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012946]Done.

[00013003]Version checking[1]...
[00013096][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013196][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013259][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013322][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013436][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013548][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013651][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013748][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013849][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013997][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014102][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014248][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014312][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014406][01 00][00] v1.23.3419 -> v1.23.3419
[00014461][01 01][00] v1.23.3419 -> v1.23.3419
[00014532][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014580]Packet upgrade cancelled at version checking.



[00012727]========== remo-con disconnect. boot(15) ============
[00012800]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012860]Packet upgrade start...

[00012916]Packet checking...
[00012970]Packet vlink 01.04.0010 <-> 01.03.0020.
[00013022]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013162]Done.

[00013217]Version checking[1]...
[00013325][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013405][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013468][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013549][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013665][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013754][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013854][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013959][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014058][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014216][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014349][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014474][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014549][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014601][01 00][00] v1.23.3419 -> v1.23.3419
[00014660][01 01][00] v1.23.3419 -> v1.23.3419
[00014723][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014774]Packet upgrade cancelled at version checking.



[00012656]========== 2015.09.08 16:22:40. boot(15) ============
[00012710]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012761]Packet upgrade start...

[00012824]Packet checking...
[00012877]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012928]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012987]Done.

[00013041]Version checking[1]...
[00013130][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013225][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013297][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013364][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013488][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013581][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013705][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013800][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013924][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014091][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014194][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014373][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014444][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014496][01 00][00] v1.23.3419 -> v1.23.3419
[00014550][01 01][00] v1.23.3419 -> v1.23.3419
[00014612][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014664]Packet upgrade cancelled at version checking.



[00012650]========== 2015.09.08 16:24:57. boot(15) ============
[00012701]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012755]Packet upgrade start...

[00012816]Packet checking...
[00012867]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012921]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012980]Done.

[00013033]Version checking[1]...
[00013137][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013232][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013297][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013378][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013514][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013608][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013717][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013808][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013907][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014090][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014179][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014337][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014417][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014476][01 00][00] v1.23.3419 -> v1.23.3419
[00014530][01 01][00] v1.23.3419 -> v1.23.3419
[00014593][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014653]Packet upgrade cancelled at version checking.



[00012653]========== remo-con disconnect. boot(15) ============
[00012703]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012757]Packet upgrade start...

[00012819]Packet checking...
[00012869]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012923]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012980]Done.

[00013033]Version checking[1]...
[00013115][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013195][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013262][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013344][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013474][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013564][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013688][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013788][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013888][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014034][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014219][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014379][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014464][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014519][01 00][00] v1.23.3419 -> v1.23.3419
[00014571][01 01][00] v1.23.3419 -> v1.23.3419
[00014646][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014698]Packet upgrade cancelled at version checking.



[00012669]========== 2015.09.09 16:47:09. boot(15) ============
[00012724]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x1890321a].
[00012781]Packet upgrade start...

[00012841]Packet checking...
[00012894]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012955]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013008]Done.

[00013064]Version checking[1]...
[00013173][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013273][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013335][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013407][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013553][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013645][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013745][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013845][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013950][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014134][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014224][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014384][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014459][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014513][01 00][00] v1.23.3419 -> v1.23.3419
[00014567][01 01][00] v1.23.3419 -> v1.23.3419
[00014651][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014703]Packet upgrade cancelled at version checking.



[00015437]========== 2016.03.19 17:44:10. boot(15) ============
[00015485]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00015541]Packet upgrade start...

[00015594]Packet checking...
[00015645]Packet vlink 01.07.0060 <-> 01.06.0040.
[00015700]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00015749]Done.

[00015797]Version checking[1]...
[00015880][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015977][03 06][00] v2.3.0.13 -> v2.4.13.0 need upgrade.
[00016053][04 00][00] v1.41.0.0 -> v1.41.0.0
[00016263][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00016360][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016445][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016560][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016661][12 03][00] v1.10.0.0 -> v1.10.0.0
[00029211][15 00][00] device not detected.
[00029329][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029464][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029536][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029586][01 00][00] v1.23.3419 -> v1.29.4920 need upgrade
[00029642][01 01][00] v1.23.3419 -> v1.29.4920 need upgrade
[00042194][08 00][00] device not detected.
[00042274][09 00][00] v1.7.0.3 -> v2.13.0.0 need upgrade.
[00042326]Done.

[00044384]Waiting for user confirm...
[00054434]Timeout, start upgrade automatically.

[00054538]Firmware upgrading[1]...
[00066881][01 00] Firmware upgrade start...
[00014640][01 00] Firmware upgrade finished successfully.
[00014695]Done.

[00014749]Packet [C:\P3X_FW_V01.07.0060.bin] resumed, card sn [0x017dc0a6].
[00014806]Packet vlink 01.07.0060 <-> 01.06.0040.
[00014864]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014915]Version checking[2]...
[00015002][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015102][03 06][00] v2.3.0.13 -> v2.4.13.0 need upgrade.
[00015166][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015302][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00015415][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015515][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015615][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015750][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028301][15 00][00] device not detected.
[00028393][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028551][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028615][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028677][01 00][05] v1.29.4920 -> v1.29.4920
[00028730][01 01][00] v1.23.3419 -> v1.29.4920 need upgrade
[00041281][08 00][00] device not detected.
[00041357][09 00][00] v1.7.0.3 -> v2.13.0.0 need upgrade.
[00041409]Done.

[00041462]Firmware upgrading[2]...
[00041718][01 01] Firmware upgrade start...
[00071992][01 01] Firmware upgrade finished successfully.
[00072063][11 00] Firmware upgrade start...
[00121301][11 00] Firmware upgrade finished successfully.
[00121567][03 06] Firmware upgrade start...
[00459081][03 06] Firmware upgrade finished successfully.
[00459169][09 00] Firmware upgrade start...
[00512740][09 00] Firmware upgrade finished successfully.
[00512796]Done.

[00512858]Version checking[3]...
[00512947][03 05][00] v34.2.0.9 -> v34.2.0.9
[00513026][03 06][05] v2.4.13.0 -> v2.4.13.0
[00513093][04 00][00] v1.41.0.0 -> v1.41.0.0
[00513226][11 00][05] v1.7.15.1 -> v1.7.15.1
[00513326][12 00][00] v1.10.0.0 -> v1.10.0.0
[00513426][12 01][00] v1.10.0.0 -> v1.10.0.0
[00513536][12 02][00] v1.10.0.0 -> v1.10.0.0
[00513635][12 03][00] v1.10.0.0 -> v1.10.0.0
[00526194][15 00][00] device not detected.
[00526291][17 00][00] v1.1.1.7 -> v1.1.1.7
[00526410][17 01][00] v1.0.2.7 -> v1.0.2.7
[00526496][19 00][00] v1.0.8.96 -> v1.0.8.96
[00526559][01 00][05] v1.29.4920 -> v1.29.4920
[00526611][01 01][05] v1.29.4920 -> v1.29.4920
[00539174][08 00][00] device not detected.
[00539237][09 00][05] v2.13.0.0 -> v2.13.0.0
[00539289]Packet upgrade failed at version checking.



[00013180]========== remo-con disconnect. boot(15) ============
[00013234]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00013287]Packet upgrade start...

[00013347]Packet checking...
[00013401]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013459]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013513]Done.

[00013566]Version checking[1]...
[00013691][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013791][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013860][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013992][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014099][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014225][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014331][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014441][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027072][15 00][00] device not detected.
[00027177][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027340][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027407][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027460][01 00][00] v1.29.4920 -> v1.29.4920
[00027518][01 01][00] v1.29.4920 -> v1.29.4920
[00040072][08 00][00] device not detected.
[00040147][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040203]Packet upgrade failed at version checking.



[00013281]========== 2016.03.19 17:58:26. boot(15) ============
[00013335]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00013392]Packet upgrade start...

[00013450]Packet checking...
[00013503]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013560]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013613]Done.

[00013667]Version checking[1]...
[00013788][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013889][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013960][04 00][00] v1.41.0.0 -> v1.41.0.0
[00016623][11 00][00] v1.7.15.1 -> v1.7.15.1
[00016727][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016827][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016929][12 02][00] v1.10.0.0 -> v1.10.0.0
[00017027][12 03][00] v1.10.0.0 -> v1.10.0.0
[00029579][15 00][00] device not detected.
[00029667][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029828][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029909][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029966][01 00][00] v1.29.4920 -> v1.29.4920
[00030018][01 01][00] v1.29.4920 -> v1.29.4920
[00042572][08 00][00] device not detected.
[00042662][09 00][00] v2.13.0.0 -> v2.13.0.0
[00042717]Packet upgrade failed at version checking.



[00013292]========== remo-con disconnect. boot(15) ============
[00013343]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00013397]Packet upgrade start...

[00013459]Packet checking...
[00013510]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013566]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013623]Done.

[00013674]Version checking[1]...
[00013771][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013947][03 06][00] v2.4.13.0 -> v2.4.13.0
[00014009][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014154][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014272][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014376][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014477][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014576][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027136][15 00][00] device not detected.
[00027234][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027374][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027439][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027493][01 00][00] v1.29.4920 -> v1.29.4920
[00027548][01 01][00] v1.29.4920 -> v1.29.4920
[00040118][08 00][00] device not detected.
[00040200][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040255]Packet upgrade failed at version checking.



[00013343]========== remo-con disconnect. boot(15) ============
[00013397]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00013453]Packet upgrade start...

[00013514]Packet checking...
[00013568]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013633]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013693]Done.

[00013744]Version checking[1]...
[00013827][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013901][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013963][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014101][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014210][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014310][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014410][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014510][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027072][15 00][00] device not detected.
[00027172][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027305][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027371][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027425][01 00][00] v1.29.4920 -> v1.29.4920
[00027480][01 01][00] v1.29.4920 -> v1.29.4920
[00040041][08 00][00] device not detected.
[00040110][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040166]Packet upgrade failed at version checking.



[00564810]========== 2016.03.19 18:45:42. boot(15) ============
[00564869]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x017dc0a6].
[00564999]Packet upgrade start...

[00565061]Packet checking...
[00565120]Packet vlink 01.06.0040 <-> 01.05.0030.
[00565179]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00565242]Done.

[00565298]Version checking[1]...
[00565402][03 05][00] v34.2.0.9 -> v34.2.0.9
[00565501][03 06][00] v2.4.13.0 -> v2.4.10.7
[00565573][04 00][00] v1.41.0.0 -> v1.41.0.0
[00565703][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00565810][12 00][00] v1.10.0.0 -> v1.10.0.0
[00565915][12 01][00] v1.10.0.0 -> v1.10.0.0
[00566041][12 02][00] v1.10.0.0 -> v1.10.0.0
[00566142][12 03][00] v1.10.0.0 -> v1.10.0.0
[00578695][15 00][00] device not detected.
[00578806][17 00][00] v1.1.1.7 -> v1.1.1.7
[00578945][17 01][00] v1.0.2.7 -> v1.0.2.7
[00579025][19 00][00] v1.0.8.96 -> v1.0.8.96
[00579087][01 00][00] v1.29.4920 -> v1.26.4315
[00579145][01 01][00] v1.29.4920 -> v1.26.4315
[00012929]========== remo-con disconnect. boot(15) ============
[00012988]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x017dc0a6].
[00013042]Packet upgrade start...

[00013102]Packet checking...
[00013164]Packet vlink 01.06.0040 <-> 01.05.0030.
[00013220]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013275]Done.

[00013336]Version checking[1]...
[00013426][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013506][03 06][00] v2.4.13.0 -> v2.4.10.7
[00013569][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013711][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00013822][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013921][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014022][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014126][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026677][15 00][00] device not detected.
[00026776][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026936][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027011][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027070][01 00][00] v1.29.4920 -> v1.26.4315
[00027123][01 01][00] v1.29.4920 -> v1.26.4315
[00039684][08 00][00] device not detected.
[00039872][09 00][00] v2.13.0.0 -> v2.13.0.0
[00039929]Done.

[00041991]Waiting for user confirm...
[00052048]Timeout, start upgrade automatically.

[00052165]Firmware upgrading[1]...
[00052233][11 00] Firmware upgrade start...
[00099525][11 00] Firmware upgrade finished successfully.
[00099588]Done.

[00099647]Version checking[2]...
[00099736][03 05][00] v34.2.0.9 -> v34.2.0.9
[00099836][03 06][00] v2.4.13.0 -> v2.4.10.7
[00099903][04 00][00] v1.41.0.0 -> v1.41.0.0
[00100036][11 00][05] v1.7.15.1 -> v1.7.15.1
[00100140][12 00][00] v1.10.0.0 -> v1.10.0.0
[00100241][12 01][00] v1.10.0.0 -> v1.10.0.0
[00100340][12 02][00] v1.10.0.0 -> v1.10.0.0
[00100440][12 03][00] v1.10.0.0 -> v1.10.0.0
[00112995][15 00][00] device not detected.
[00113100][17 00][00] v1.1.1.7 -> v1.1.1.7
[00113240][17 01][00] v1.0.2.7 -> v1.0.2.7
[00113316][19 00][00] v1.0.8.96 -> v1.0.8.96
[00113373][01 00][00] v1.29.4920 -> v1.26.4315
[00113437][01 01][00] v1.29.4920 -> v1.26.4315
[00125999][08 00][00] device not detected.
[00126078][09 00][00] v2.13.0.0 -> v2.13.0.0
[00126135]Packet upgrade failed at version checking.



[00012940]========== remo-con disconnect. boot(15) ============
[00013003]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x017dc0a6].
[00013062]Packet upgrade start...

[00013128]Packet checking...
[00013186]Packet vlink 01.06.0040 <-> 01.05.0030.
[00013243]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013306]Done.

[00013367]Version checking[1]...
[00013470][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013553][03 06][00] v2.4.13.0 -> v2.4.10.7
[00013614][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013749][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013850][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013959][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014058][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014159][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026712][15 00][00] device not detected.
[00026815][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026961][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027141][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027197][01 00][00] v1.29.4920 -> v1.26.4315
[00027257][01 01][00] v1.29.4920 -> v1.26.4315
[00039822][08 00][00] device not detected.
[00039900][09 00][00] v2.13.0.0 -> v2.13.0.0
[00039959]Packet upgrade failed at version checking.



[00221525]========== 2016.03.19 19:06:57. boot(15) ============
[00221579]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x017dc0a6].
[00221632]Packet upgrade start...

[00221692]Packet checking...
[00221745]Packet vlink 01.03.0020 <-> 01.01.0009.
[00221800]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 1).
[00221853]Done.

[00221906]Version checking[1]...
[00221999][03 05][00] v34.2.0.9 -> v34.2.0.9
[00222101][03 06][00] v2.4.13.0 -> v2.2.6.19
[00222171][04 00][00] v1.41.0.0 -> v1.40.0.0 need upgrade.
[00222244][09 00][00] v2.13.0.0 -> v1.7.0.3
[00222376][11 00][00] v1.7.15.1 -> v1.7.0.0
[00222477][12 00][00] v1.10.0.0 -> v1.8.0.0
[00222574][12 01][00] v1.10.0.0 -> v1.8.0.0
[00222681][12 02][00] v1.10.0.0 -> v1.8.0.0
[00222783][12 03][00] v1.10.0.0 -> v1.8.0.0
[00235336][15 00][00] device not detected.
[00235464][17 00][00] v1.1.1.7 -> v1.1.1.7
[00235604][17 01][00] v1.0.2.7 -> v1.0.2.7
[00235674][19 00][00] v1.0.8.96 -> v1.0.8.96
[00235727][01 00][00] v1.29.4920 -> v1.23.3419 need upgrade
[00235782][01 01][00] v1.29.4920 -> v1.23.3419 need upgrade
[00248335][08 00][00] device not detected.
[00248390]Done.

[00250442]Waiting for user confirm...
[00260498]Timeout, start upgrade automatically.

[00260604]Firmware upgrading[1]...
[00260742][01 01] Firmware upgrade start...
[00290988][01 01] Firmware upgrade finished successfully.
[00291066][04 00] Firmware upgrade start...
[00348404][04 00] Firmware upgrade finished successfully.
[00348459]Done.

[00348512]Version checking[2]...
[00348607][03 05][00] v34.2.0.9 -> v34.2.0.9
[00348707][03 06][00] v2.4.13.0 -> v2.2.6.19
[00348778][04 00][05] v1.40.0.0 -> v1.40.0.0
[00348921][09 00][00] v2.13.0.0 -> v1.7.0.3
[00349066][11 00][00] v1.7.15.1 -> v1.7.0.0
[00349175][12 00][00] v1.10.0.0 -> v1.8.0.0
[00349275][12 01][00] v1.10.0.0 -> v1.8.0.0
[00349375][12 02][00] v1.10.0.0 -> v1.8.0.0
[00349475][12 03][00] v1.10.0.0 -> v1.8.0.0
[00362029][15 00][00] device not detected.
[00362130][17 00][00] v1.1.1.7 -> v1.1.1.7
[00362271][17 01][00] v1.0.2.7 -> v1.0.2.7
[00362340][19 00][00] v1.0.8.96 -> v1.0.8.96
[00362397][01 00][00] v1.29.4920 -> v1.23.3419 need upgrade
[00362455][01 01][05] v1.23.3419 -> v1.23.3419
[00375008][08 00][00] device not detected.
[00375061]Packet upgrade failed at version checking.



[00013150]========== remo-con disconnect. boot(15) ============
[00013209]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x017dc0a6].
[00013291]Packet upgrade start...

[00013349]Packet checking...
[00013407]Packet vlink 01.04.0010 <-> 01.03.0020.
[00013474]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013533]Done.

[00013606]Version checking[1]...
[00013703][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013803][03 06][00] v2.4.13.0 -> v2.3.0.13
[00013874][04 00][00] v1.40.0.0 -> v1.41.0.0 need upgrade.
[00013948][09 00][00] v2.13.0.0 -> v1.7.0.3
[00014088][11 00][00] v1.7.15.1 -> v1.7.0.0
[00014191][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014292][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014391][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014511][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027071][15 00][00] device not detected.
[00027193][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027334][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027408][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027475][01 00][00] v1.29.4920 -> v1.23.3419
[00027534][01 01][00] v1.23.3419 -> v1.23.3419
[00040091][08 00][00] device not detected.
[00040154]Done.

[00042213]Waiting for user confirm...
[00052274]Timeout, start upgrade automatically.

[00052400]Firmware upgrading[1]...
[00052497][04 00] Firmware upgrade start...
[00111406][04 00] Firmware upgrade finished successfully.
[00111556]Done.

[00111611]Version checking[2]...
[00111709][03 05][00] v34.2.0.9 -> v34.2.0.9
[00111809][03 06][00] v2.4.13.0 -> v2.3.0.13
[00111881][04 00][05] v1.41.0.0 -> v1.41.0.0
[00111973][09 00][00] v2.13.0.0 -> v1.7.0.3
[00112115][11 00][00] v1.7.15.1 -> v1.7.0.0
[00112225][12 00][00] v1.10.0.0 -> v1.10.0.0
[00112319][12 01][00] v1.10.0.0 -> v1.10.0.0
[00112419][12 02][00] v1.10.0.0 -> v1.10.0.0
[00112537][12 03][00] v1.10.0.0 -> v1.10.0.0
[00125106][15 00][00] device not detected.
[00125218][17 00][00] v1.1.1.7 -> v1.1.1.7
[00125378][17 01][00] v1.0.2.7 -> v1.0.2.7
[00125493][19 00][00] v1.0.8.96 -> v1.0.8.96
[00125552][01 00][00] v1.29.4920 -> v1.23.3419
[00125617][01 01][00] v1.23.3419 -> v1.23.3419
[00138179][08 00][00] device not detected.
[00138238]Packet upgrade failed at version checking.



[00211317]========== remo-con disconnect. boot(15) ============
[00211405]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00211464]Packet upgrade start...

[00211536]Packet checking...
[00211593]Packet vlink 01.07.0060 <-> 01.06.0040.
[00211652]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00211716]Done.

[00211777]Version checking[1]...
[00211874][03 05][00] v34.2.0.9 -> v34.2.0.9
[00211974][03 06][00] v2.4.13.0 -> v2.4.13.0
[00212043][04 00][00] v1.41.0.0 -> v1.41.0.0
[00212174][11 00][00] v1.7.15.1 -> v1.7.15.1
[00212288][12 00][00] v1.10.0.0 -> v1.10.0.0
[00212423][12 01][00] v1.10.0.0 -> v1.10.0.0
[00212525][12 02][00] v1.10.0.0 -> v1.10.0.0
[00212624][12 03][00] v1.10.0.0 -> v1.10.0.0
[00225188][15 00][00] device not detected.
[00225300][17 00][00] v1.1.1.7 -> v1.1.1.7
[00225464][17 01][00] v1.0.2.7 -> v1.0.2.7
[00225560][19 00][00] v1.0.8.96 -> v1.0.8.96
[00225620][01 00][00] v1.29.4920 -> v1.29.4920
[00225678][01 01][00] v1.23.3419 -> v1.29.4920 need upgrade
[00238242][08 00][00] device not detected.
[00238320][09 00][00] v2.13.0.0 -> v2.13.0.0
[00238385]Done.

[00240516]Waiting for user confirm...
[00250583]Timeout, start upgrade automatically.

[00250698]Firmware upgrading[1]...
[00250855][01 01] Firmware upgrade start...
[00281118][01 01] Firmware upgrade finished successfully.
[00281181]Done.

[00281243]Version checking[2]...
[00281339][03 05][00] v34.2.0.9 -> v34.2.0.9
[00281438][03 06][00] v2.4.13.0 -> v2.4.13.0
[00281501][04 00][00] v1.41.0.0 -> v1.41.0.0
[00281638][11 00][00] v1.7.15.1 -> v1.7.15.1
[00281758][12 00][00] v1.10.0.0 -> v1.10.0.0
[00281862][12 01][00] v1.10.0.0 -> v1.10.0.0
[00281987][12 02][00] v1.10.0.0 -> v1.10.0.0
[00282087][12 03][00] v1.10.0.0 -> v1.10.0.0
[00294650][15 00][00] device not detected.
[00294744][17 00][00] v1.1.1.7 -> v1.1.1.7
[00294883][17 01][00] v1.0.2.7 -> v1.0.2.7
[00294984][19 00][00] v1.0.8.96 -> v1.0.8.96
[00295042][01 00][00] v1.29.4920 -> v1.29.4920
[00295107][01 01][05] v1.29.4920 -> v1.29.4920
[00307669][08 00][00] device not detected.
[00307767][09 00][00] v2.13.0.0 -> v2.13.0.0
[00307827]Packet upgrade failed at version checking.



[00012988]========== remo-con disconnect. boot(15) ============
[00013048]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00013109]Packet upgrade start...

[00013178]Packet checking...
[00013242]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013307]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013368]Done.

[00013431]Version checking[1]...
[00013537][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013637][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013704][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013838][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013946][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014071][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014203][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014326][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026886][15 00][00] device not detected.
[00027009][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027167][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027258][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027406][01 00][00] v1.29.4920 -> v1.29.4920
[00027470][01 01][00] v1.29.4920 -> v1.29.4920
[00040033][08 00][00] device not detected.
[00040122][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040185]Packet upgrade failed at version checking.



[00013005]========== remo-con disconnect. boot(15) ============
[00013068]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00013132]Packet upgrade start...

[00013194]Packet checking...
[00013256]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013323]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013381]Done.

[00013445]Version checking[1]...
[00013545][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013626][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013695][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013826][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013926][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014034][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014134][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014234][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026790][15 00][00] device not detected.
[00026914][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027054][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027146][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027206][01 00][00] v1.29.4920 -> v1.29.4920
[00027269][01 01][00] v1.29.4920 -> v1.29.4920
[00039833][08 00][00] device not detected.
[00039922][09 00][00] v2.13.0.0 -> v2.13.0.0
[00039980]Packet upgrade failed at version checking.



[00012991]========== remo-con disconnect. boot(15) ============
[00013054]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00013122]Packet upgrade start...

[00013184]Packet checking...
[00013252]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013313]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013375]Done.

[00013444]Version checking[1]...
[00013548][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013648][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013715][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013868][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013988][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014172][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014297][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014400][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026965][15 00][00] device not detected.
[00027079][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027218][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027309][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027368][01 00][00] v1.29.4920 -> v1.29.4920
[00027436][01 01][00] v1.29.4920 -> v1.29.4920
[00013012]========== remo-con disconnect. boot(15) ============
[00013078]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00013157]Packet upgrade start...

[00013223]Packet checking...
[00013284]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013362]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013423]Done.

[00013489]Version checking[1]...
[00013593][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013713][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013781][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013934][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014066][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014193][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014321][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014447][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027014][15 00][00] device not detected.
[00027137][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027297][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027387][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027453][01 00][00] v1.29.4920 -> v1.29.4920
[00027520][01 01][00] v1.29.4920 -> v1.29.4920
[00040083][08 00][00] device not detected.
[00040168][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040249]Packet upgrade failed at version checking.



[00013015]========== remo-con disconnect. boot(15) ============
[00013078]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00013145]Packet upgrade start...

[00013211]Packet checking...
[00013277]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013343]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013405]Done.

[00013475]Version checking[1]...
[00013581][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013782][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013861][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013999][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014116][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014226][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014325][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014426][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026992][15 00][00] device not detected.
[00027106][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027246][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027326][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027406][01 00][00] v1.29.4920 -> v1.29.4920
[00027469][01 01][00] v1.29.4920 -> v1.29.4920
[00040037][08 00][00] device not detected.
[00040126][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040189]Packet upgrade failed at version checking.



[00155501]========== 2016.03.19 20:22:32. boot(15) ============
[00155566]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00155636]Packet upgrade start...

[00155704]Packet checking...
[00155777]Packet vlink 01.07.0060 <-> 01.06.0040.
[00155844]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00155923]Done.

[00155988]Version checking[1]...
[00156090][03 05][00] v34.2.0.9 -> v34.2.0.9
[00156205][03 06][00] v2.4.13.0 -> v2.4.13.0
[00156279][04 00][00] v1.41.0.0 -> v1.41.0.0
[00156468][11 00][00] v1.7.15.1 -> v1.7.15.1
[00156576][12 00][00] v1.10.0.0 -> v1.10.0.0
[00156711][12 01][00] v1.10.0.0 -> v1.10.0.0
[00156833][12 02][00] v1.10.0.0 -> v1.10.0.0
[00156930][12 03][00] v1.10.0.0 -> v1.10.0.0
[00169499][15 00][00] device not detected.
[00169608][17 00][00] v1.1.1.7 -> v1.1.1.7
[00169754][17 01][00] v1.0.2.7 -> v1.0.2.7
[00169840][19 00][00] v1.0.8.96 -> v1.0.8.96
[00169902][01 00][00] v1.29.4920 -> v1.29.4920
[00169966][01 01][00] v1.29.4920 -> v1.29.4920
[00182526][08 00][00] device not detected.
[00182617][09 00][00] v2.13.0.0 -> v2.13.0.0
[00182679]Packet upgrade failed at version checking.



[00155051]========== 2016.03.19 20:26:33. boot(15) ============
[00155113]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00155255]Packet upgrade start...

[00155327]Packet checking...
[00155393]Packet vlink 01.07.0060 <-> 01.06.0040.
[00155454]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00155522]Done.

[00155587]Version checking[1]...
[00155699][03 05][00] v34.2.0.9 -> v34.2.0.9
[00155796][03 06][00] v2.4.13.0 -> v2.4.13.0
[00155872][04 00][00] v1.41.0.0 -> v1.41.0.0
[00156017][11 00][00] v1.7.15.1 -> v1.7.15.1
[00156137][12 00][00] v1.10.0.0 -> v1.10.0.0
[00156260][12 01][00] v1.10.0.0 -> v1.10.0.0
[00156360][12 02][00] v1.10.0.0 -> v1.10.0.0
[00156460][12 03][00] v1.10.0.0 -> v1.10.0.0
[00169028][15 00][00] device not detected.
[00169137][17 00][00] v1.1.1.7 -> v1.1.1.7
[00169279][17 01][00] v1.0.2.7 -> v1.0.2.7
[00169374][19 00][00] v1.0.8.96 -> v1.0.8.96
[00169437][01 00][00] v1.29.4920 -> v1.29.4920
[00169500][01 01][00] v1.29.4920 -> v1.29.4920
[00182070][08 00][00] device not detected.
[00182165][09 00][00] v2.13.0.0 -> v2.13.0.0
[00182237]Packet upgrade failed at version checking.



[00071760]========== remo-con disconnect. boot(15) ============
[00071837]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x017dc0a6].
[00071905]Packet upgrade start...

[00071979]Packet checking...
[00072064]Packet vlink 01.07.0060 <-> 01.06.0040.
[00072133]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00072202]Done.

[00072271]Version checking[1]...
[00072366][03 05][00] v34.2.0.9 -> v34.2.0.9
[00072466][03 06][00] v2.4.13.0 -> v2.4.13.0
[00072541][04 00][00] v1.41.0.0 -> v1.41.0.0
[00072690][11 00][00] v1.7.15.1 -> v1.7.15.1
[00072799][12 00][00] v1.10.0.0 -> v1.10.0.0
[00072919][12 01][00] v1.10.0.0 -> v1.10.0.0
[00073019][12 02][00] v1.10.0.0 -> v1.10.0.0
[00073145][12 03][00] v1.10.0.0 -> v1.10.0.0
[00085710][15 00][00] device not detected.
[00085815][17 00][00] v1.1.1.7 -> v1.1.1.7
[00085975][17 01][00] v1.0.2.7 -> v1.0.2.7
[00086075][19 00][00] v1.0.8.96 -> v1.0.8.96
[00086227][01 00][00] v1.29.4920 -> v1.29.4920
[00086291][01 01][00] v1.29.4920 -> v1.29.4920
[00098866][08 00][00] device not detected.
[00098957][09 00][00] v2.13.0.0 -> v2.13.0.0
[00099028]Packet upgrade failed at version checking.



[00013361]========== remo-con disconnect. boot(15) ============
[00013432]Packet [C:\P3X_FW_V01.05.0030.bin] detected, card sn [0x1890321a].
[00013504]Packet upgrade start...

[00013586]Packet checking...
[00013653]Packet vlink 01.05.0030 <-> 01.04.0010.
[00013731]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013801]Done.

[00013876]Version checking[1]...
[00013990][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014090][03 06][00] v2.4.13.0 -> v2.4.0.5
[00014167][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014308][11 00][00] v1.7.15.1 -> v1.7.0.0
[00014436][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014561][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014688][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014816][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027391][15 00][00] device not detected.
[00027497][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027653][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027754][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027824][01 00][00] v1.29.4920 -> v1.26.4315
[00027899][01 01][00] v1.29.4920 -> v1.26.4315
[00040473][08 00][00] device not detected.
[00040574][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040645]Packet upgrade failed at version checking.



[00013267]========== remo-con disconnect. boot(15) ============
[00013345]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x1890321a].
[00013426]Packet upgrade start...

[00013509]Packet checking...
[00013588]Packet vlink 01.06.0040 <-> 01.05.0030.
[00013661]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013738]Done.

[00013811]Version checking[1]...
[00013939][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014053][03 06][00] v2.4.13.0 -> v2.4.10.7
[00014136][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014294][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014433][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014642][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014794][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014922][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027499][15 00][00] device not detected.
[00027623][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027783][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027883][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027961][01 00][00] v1.29.4920 -> v1.26.4315
[00028035][01 01][00] v1.29.4920 -> v1.26.4315
[00040620][08 00][00] device not detected.
[00040703][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040792]Packet upgrade failed at version checking.



[00013292]========== remo-con disconnect. boot(15) ============
[00013374]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x1890321a].
[00013453]Packet upgrade start...

[00013539]Packet checking...
[00013614]Packet vlink 01.06.0040 <-> 01.05.0030.
[00013692]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013767]Done.

[00013843]Version checking[1]...
[00013959][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014059][03 06][00] v2.4.13.0 -> v2.4.10.7
[00014142][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014299][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014423][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014548][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014673][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014799][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027380][15 00][00] device not detected.
[00027486][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027661][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027768][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027840][01 00][00] v1.29.4920 -> v1.26.4315
[00027919][01 01][00] v1.29.4920 -> v1.26.4315
[00040498][08 00][00] device not detected.
[00040609][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040680]Packet upgrade failed at version checking.



[00013047]========== remo-con disconnect. boot(15) ============
[00013115]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x1890321a].
[00013194]Packet upgrade start...

[00013272]Packet checking...
[00013344]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013494]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013572]Done.

[00013644]Version checking[1]...
[00013757][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013859][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013943][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014082][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014185][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014306][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014456][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014588][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027159][15 00][00] device not detected.
[00027281][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027452][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027568][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027635][01 00][00] v1.29.4920 -> v1.29.4920
[00027706][01 01][00] v1.29.4920 -> v1.29.4920
[00040280][08 00][00] device not detected.
[00040387][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040467]Packet upgrade failed at version checking.



[00013127]========== 2016.03.21 13:20:12. boot(15) ============
[00013197]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x1890321a].
[00013272]Packet upgrade start...

[00013351]Packet checking...
[00013424]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013497]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013567]Done.

[00013645]Version checking[1]...
[00013750][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013870][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013956][04 00][00] v1.41.0.0 -> v1.41.0.0
[00016615][11 00][00] v1.7.15.1 -> v1.7.15.1
[00016744][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016877][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016996][12 02][00] v1.10.0.0 -> v1.10.0.0
[00017121][12 03][00] v1.10.0.0 -> v1.10.0.0
[00029692][15 00][00] device not detected.
[00029822][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029977][17 01][00] v1.0.2.7 -> v1.0.2.7
[00030073][19 00][00] v1.0.8.96 -> v1.0.8.96
[00030151][01 00][00] v1.29.4920 -> v1.29.4920
[00030226][01 01][00] v1.29.4920 -> v1.29.4920
[00042802][08 00][00] device not detected.
[00042899][09 00][00] v2.13.0.0 -> v2.13.0.0
[00043062]Packet upgrade failed at version checking.



[00013075]========== 2016.03.21 13:21:12. boot(15) ============
[00013149]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x1890321a].
[00013227]Packet upgrade start...

[00013305]Packet checking...
[00013387]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013461]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013540]Done.

[00013611]Version checking[1]...
[00013713][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013835][03 06][00] v2.4.13.0 -> v2.4.13.0
[00013918][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014075][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014195][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014298][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014441][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014575][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027148][15 00][00] device not detected.
[00027279][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027452][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027564][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027635][01 00][00] v1.29.4920 -> v1.29.4920
[00027709][01 01][00] v1.29.4920 -> v1.29.4920
[00040283][08 00][00] device not detected.
[00040402][09 00][00] v2.13.0.0 -> v2.13.0.0
[00040475]Packet upgrade failed at version checking.

jkgoos@sr.net Posted at 2016-3-22 01:39
[00012244][01 00] Firmware upgrade finished successfully.
[00012342]Done.

Can you try to downgrade to 1.6 and see if you get video.
Seems  your video transmission module is corrupted.
If you look at the last section of entries, you see module 8 and 15 Device Not Detected.
If you cannot downgrade then upgrade and clear that up, then you will have to contact the support center and have the aircraft send in for repair.
Also, if you cannot get it to work, you can reply to this post and I can also send an email to the support center to have someone contact you.
Again, sorry for the issues you are having.

Mines working GREAT!
Did the update last week, and later that day took my P3A and did an Aerial Survey. No issues at all!
I always manually fly my grid patterns for surveys with the DJI app.
Pix4d has a capture app that is very buggy. I used it twice and did not get good results. So i just set the bird up for how i want it, and fly it all manually.
Absolute best way!

Hi, got myself a new Phantom 3 Standard yesterday and went through the firmware upgrade steps using the DJI go app, there was an error mid way through the update according to the log file and the drone now makes a beep beep noise with yellow flashing lights whenever it is powered up irrespective of if a memory card is in the camera. Also the recessed button/light that you push to link the controller with the aircraft is flashing green. The controller will not link with the aircraft, the app says "remote controller connected, connect your aircraft". I tried deleting the app and doing it again, but as it stands there is no way of getting comms between the aircraft and the controller with the pairing light on the aircraft always flashing green, it's unresponsive when pushed. I tried power cycling without any success. When I go into the app it's giving N/A to the Version

Any help much appreciated, things not going well with a brand new drone.

[00064030]========== 2016.03.20 17:17:06. boot(15) ============
[00064070]Packet [C:\P3C_FW_V99.99.9999.bin] detected, card sn [0x34f10e67].
[00064116]Packet upgrade start...

[00064156]Packet checking...
[00064190]Packet vlink 01.04.0060 <-> 01.03.0050.
[00064227]Record vlink 01.02.0040 <-> 01.01.0030 (flow = 0).
[00064267]Done.

[00064311]Version checking[1]...
[00064348][01 00][00] v1.13.4312 -> v1.14.4920 need upgrade
[00064384][01 01][00] v1.13.4312 -> v1.14.4920 need upgrade
[00064454][03 06][00] v2.3.0.13 -> v2.4.13.0 need upgrade.
[00064510][09 00][00] v0.1.0.9 -> v0.1.1.0 need upgrade.
[00064643][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00064678]Done.

[00066715]Waiting for user confirm...
[00076755]Timeout, start upgrade automatically.

[00076833]Firmware upgrading[1]...
[00093123][01 00] Firmware upgrade start...
[00013938][01 00] Firmware upgrade finished successfully.
[00013990]Done.

[00014023]Packet [C:\P3C_FW_V99.99.9999.bin] resumed, card sn [0x34f10e67].
[00014060]Packet vlink 01.04.0060 <-> 01.03.0050.
[00014104]Record vlink 01.02.0040 <-> 01.01.0030 (flow = 0).
[00014146]Version checking[2]...
[00014184][01 00][05] v1.14.4920 -> v1.14.4920
[00014220][01 01][00] v1.13.4312 -> v1.14.4920 need upgrade
[00014304][03 06][00] v2.3.0.13 -> v2.4.13.0 need upgrade.
[00014480][09 00][00] v0.1.0.9 -> v0.1.1.0 need upgrade.
[00014626][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00014659]Done.

[00014692]Firmware upgrading[2]...
[00014850][01 01] Firmware upgrade start...
[00045154][01 01] Firmware upgrade finished successfully.
[00045198][11 00] Firmware upgrade start...
[00093663][11 00] Firmware upgrade finished successfully.
[00093919][03 06] Firmware upgrade start...
[00467584][03 06] Firmware upgrade finished successfully.
[00467647][09 00] Firmware upgrade start...
[00561060][09 00] Firmware upgrade finish failed (step = 4, err = 0xaa, idx = 0, los = 30, ng = 0).
[00591097]Done.

[00591136]Version checking[3]...
[00591178][01 00][05] v1.14.4920 -> v1.14.4920
[00591215][01 01][05] v1.14.4920 -> v1.14.4920
[00603749][03 06][05] device not detected.
[00616286][09 00][06] device not detected.
[00628826][11 00][05] device not detected.
[00628869]Packet upgrade failed at version checking.

Donnie Posted at 2016-3-20 14:28
Yes, sorry to say I think it is your device,  I have seen many complaints about Samsung Devices a ...

my Samsun tab s2 works fine

You left one answer out.  4.  Had trouble updating.  That's me.  I go thru the steps over and over and over.  Yes, I know, the definition of insanity.  However what else can I do.  I did the update in December with no problems.  I'm doing exactly the same thing but it's not working.  Talked to the techies, they can't help me.  I've spent a day and a half of this and I'm pissed.