I am able to upgrade controller but not the aircraft, camera or battery.  Keeps telling me to retry.  I have tried 10 times.  Failed everytime.  Also, whwn will dji go app support galaxy s7?

It is not a case of when, DJI do not do anything to specifically support any given phone or tablet. All they do is test various devices and then list them if they find they work OK. If you have an S7, then try it.

As for the update, did you follow the tutorial on how to perform the update? It is on this forum. And in order for anyone to help you, you need to say what model Phantom you have, because the update procedure is different for different models.

Phantom 3 Upgrade the firmware of remote controller

Phantom 3 Upgrade aircraft firmware


Please format your MicroSD card before the updating. Also you can try V1.06.0040. If it is successfully updated by V1.06.0040, then you can try V1.07.0060 again to solve the problem.
If still not working, please contect DJI Support.

Geebax Posted at 2016-3-20 23:49
It is not a case of when, DJI do not do anything to specifically support any given phone or tablet.  ...

Ok, I have a P3P, i have followed the same procedure as the previous updates but this time it has failed.  I still get the beep beep.....and then after a minute just one continuous beep that I have to turn off the phantom.  I take out the microSD card and look at the log where it says failed and try again.

Geebax Posted at 2016-3-20 23:49
It is not a case of when, DJI do not do anything to specifically support any given phone or tablet.  ...

When I use Galaxy S7, app does not connect to Phantom.  I change to iPad and it works fine.  So I use a Galaxy S5 and it also works fine.  

I have updated to 1.7....The RC shows all is "normal."  However, the front to lights are solid red.  The P3 advanced flys fine and I re-calibrated the compus.  
I have filed an official ticket yesterday, but have not heard anything.  

Any help would be much appreciated.

Thanks.

DJI-Wild Posted at 2016-3-21 06:52
Phantom 3 Upgrade the firmware of remote controller
https://youtu.be/PfWixVdZkbc
Phantom 3 Upgrade a ...

I finally got the firmware to update.  It seems the microSD card I was using might have some damage.  I used a  different card and the update finished.
Thanks.

florod63@gmail. Posted at 2016-3-21 16:38
When I use Galaxy S7, app does not connect to Phantom.  I change to iPad and it works fine.  So I  ...

I have the samsung S7 and it works fine with dji go app

maxelsson88 Posted at 2016-3-29 14:26
I have the samsung S7 and it works fine with dji go app

Is there a setting you had to enable/disable to get your s7 to work?

My Galaxy S7 is not connecting with DJI GO app. Anyone know what setting needs to be changed?

Power on your RC, connect your USB cable doesn't matter what order you do things. Galaxy S7 enable developer options (tap Build Number 7 times in About to enable), USB configuration change from Charging to MTP (Media Transfer Protocol) DJI Go App will popup with message "Open DJI Go when this USB accessory is connected?" hit OK you will see camera.