I have a few questions regarding the Matrice100 components combinations and take-off weight.
What is the total take-off weight - 3400g or 3600g ? Are there different motor/esc options available for the Matrice 100? In the shop it says for the motor kit it says: Improved to function in extreme working conditions.
We bought our Matrice 100 shortly after it has released. We added to it the guidance system, X3 camera/gimbal and dual battery. The total take-off weight of this setup is 3830g (TB47D batteries) and we have been flying this setup in our test facility for about 15min. The motors are warm but by far not hot and the batteries are hand warm. Flying this setup with only 1 TB47D battery (3360g) the battery gets hot 57'C but motor fell the same as flying with 2 batteries - flight time 10min
Battery setting: 30% battery warning - landing at 25%
We want to fly the Matrice 100 with the X5. At the moment we using the inspire to carry the X5 but we want to take the advantage of the guidance system. Since the last firmware update with option to set the min. distance the Matrice is a dream to use!!!!!
The kit to attach the X5 to the Matrice 100 is available but I can not find any information about the weight different between x3 setup to x5 setup (excluding the camera itself). If we attach the X5 to Matrice 100 what else can we use to fly the copter without exceeding the weight limit. Our minimum requirement is X5 with guidance system. By my calculations the take-off weight with X5 and guidance system should be 3670g (without the extra weight form the x5 mounting kit) using 1 battery.
Thank you Arnie
|