RC Signal Lost message after Firmware Upgrade
Home / Products / Phantom Series / Phantom 3 Pro/Adv
2171 12 2016-4-19
Uploading and Loding Picture ...(0/1)
o(^-^)o
mrokay
lvl.1
Flight distance : 2756 ft
+ Add Friend Person Message
United States
Offline

  1#
Hi there, I flew my bird last week and everything was good. 1.I upgraded the aircraft to the last firmware version v1.8.80 and still got the Signal Lost message.

2. Then I updated the Dji Go App to the last version and Upgraded the RC to V1.6 and still got the SIGNAL LOST message.
3. Then I downgrated the RC to v.1.5.80 and still no changes
Also, when I tried to re-upgrade the aircraft, i got this long/continuous BEEP sound( Not the D-D-D-D beep).
Favorite Like
IMG_0089.PNG
IMG_0090.PNG
IMG_0091.PNG
IMG_0093.PNG
IMG_0098.PNG
IMG_0088.PNG
IMG_0089.PNG
IMG_0090.PNG
IMG_0091.PNG
IMG_0092.PNG
IMG_0093.PNG
IMG_0094.PNG
IMG_0095.PNG
IMG_0096.PNG
IMG_0097.PNG
IMG_0098.PNG
IMG_0099.PNG
2016-4-19
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  2#
Hello, could you post the drone's upgrading log file and a screenshot of the fw version here?
2016-4-20
Use props
mrokay
lvl.1
Flight distance : 2756 ft
+ Add Friend Person Message
United States
Offline

  3#
DJI-Paladin Posted at 2016-4-20 06:26
Hello, could you post the drone's upgrading log file and a screenshot of the fw version here?

YES, I will do that as soon as possible
2016-4-20
Use props
tyler
New

+ Add Friend Person Message
United States
Offline

  4#
I am having the same issues with my Phantom 3 after upgrading the firmware yesterday.  RC Signal lost
2016-4-20
Use props
mrokay
lvl.1
Flight distance : 2756 ft
+ Add Friend Person Message
United States
Offline

  5#
DJI-Paladin Posted at 2016-4-20 06:26
Hello, could you post the drone's upgrading log file and a screenshot of the fw version here?

Also, i am a little bit worrying about something. I inserted the micros with only the .bin file in it. The LED light was flashing RED--GREEN  with the Beep sound then The sound STOPPED with the light still flashing Red--Green. It's been doing it for more than 35min. Should i be worried or let it continue ?
2016-4-20
Use props
mrokay
lvl.1
Flight distance : 2756 ft
+ Add Friend Person Message
United States
Offline

  6#
tyler Posted at 2016-4-20 10:40
I am having the same issues with my Phantom 3 after upgrading the firmware yesterday.  RC Signal los ...

This issue is driving me NUTTS bro. I'm going on vacate in 3 weeks and this happens. Thanks God I'm completely covered but It will take awhile to get a replacement. I don't know what to do.
2016-4-20
Use props
sidajili
lvl.2
Flight distance : 6033701 ft
  • >>>
+ Add Friend Person Message
Nigeria
Offline

  7#
mrokay Posted at 2016-4-20 16:42
This issue is driving me NUTTS bro. I'm going on vacate in 3 weeks and this happens. Thanks God I' ...

Try rebinding the RC to the drone after upgrading both to the latest version. If both upgrades were successful, rebinding might fix it.
2016-4-20
Use props
mrokay
lvl.1
Flight distance : 2756 ft
+ Add Friend Person Message
United States
Offline

  8#
sidajili Posted at 2016-4-20 12:01
Try rebinding the RC to the drone after upgrading both to the latest version. If both upgrades wer ...

Thanks for the tips. But here's the thing now. I'm upgrading the drone, it's been Beeping ( DD...DD) like that for the past 30min. The battery is getting low. smh. Dji needs to fix this bug asap.
2016-4-20
Use props
mrokay
lvl.1
Flight distance : 2756 ft
+ Add Friend Person Message
United States
Offline

  9#
DJI-Paladin Posted at 2016-4-20 06:26
Hello, could you post the drone's upgrading log file and a screenshot of the fw version here?


========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.03.08 15:12:37 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin

========== 2016.03.08 15:20:38 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.03.08 15:53:48 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.03.08 18:02:03 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.08 20:06:20 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.08 20:26:02 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.08 21:02:51 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.08 21:03:56 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.11 01:47:36 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.11 01:57:04 =====================
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Upgrading ...

========== 2016.03.18 02:42:54 =====================
Packet: P3X_FW_V01.07.0060.bin
Upgrading ...

========== 2016.03.18 17:58:16 =====================
Packet: P3X_FW_V01.07.0060.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Upgrading ...
Result: Success.

========== 2016.03.25 15:50:50 =====================
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...

========== 2014.01.01 00:04:44 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.04.20 01:17:53 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.


2016-4-20
Use props
heftrob
New

+ Add Friend Person Message
Canada
Offline

  10#
tyler Posted at 2016-4-20 10:40
I am having the same issues with my Phantom 3 after upgrading the firmware yesterday.  RC Signal los ...

I too have the same RC signal lost. Tried most of what is in this thread. No luck. DJI????
2016-4-20
Use props
Pmarten8
lvl.1

+ Add Friend Person Message
United Kingdom
Offline

  11#
Watch this it may help you it helped me to fix mine



2016-4-20
Use props
imagesbyjas
lvl.4
Flight distance : 286198 ft
+ Add Friend Person Message
Offline

  12#
Someone posted this on YouTube...


2016-4-20
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  13#
mrokay Posted at 2016-4-21 01:41
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...

Oh i see. It would be better if you could upload the log file which is under the hidden folder MISC.
2016-4-21
Use props
Advanced
Bold Text Color
Upload
Picture Add Link Emoticon
You need to log in before you can reply Login | Register now

Credit Rules