KiwiKev
lvl.1
New Zealand
Offline
|
hI,
I have been using the Osmo with my
Samsung S6, but it keeps going in to
black and white and freezing the screen live feed.
I have tried different phones, reseting it, making sure
everything was correctly fitted.
But nothing works, after i take a photo or shoot
a video, a second or 2 later the Osmo drops the wireless
signal and i have to keep waiting for about 1 or 2 minutes
for the live screen in colour to come back on.
It is so frustrating and it is not a good look when
your customers start seeing the problems you
are having.
I have updated all firmware to the current.
OSMO - 1.6.2.10
DJI GO APP - 2.8.0 (293)
CAMERA - 02.65.50.33
GIMBAL - 01.29.00.92
WIFI - 01.00.09.48
DJI could you please help me out with a solution
to this Osmo problem.
My last question is can i put in a micro usb plug
in to the Osmo's micro usb slot in the camera head
and then put the other end with a micro usb plug in
to the phones usb slot.
That way the Osmo would not have to drop the
wireless connection because it would always be
plugged in because ive attached a cable.
I don't understand why it keeps dropping the signal
when the Osmo and phone are so close to each other.
Thank You for any help, anbd let me know if you think
I should send it back to my supplier for checking the hardware
and software.
Ive only had the Osmo for a couple weeks and i also bought
an Inspire 1 Pro at the same time thinking they would make
a good pair for doing real estae properties etc.
Thanking You
Cheers Kev Borg
|
|