2015.08.05 16:08:11 ========== =====================
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
That's the problem I have. Problval put firmware-not - but Vidal
Result: Success.
2015.08.05 15:40:14 ========== =====================
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.
2015.08.05 16:08:11 ========== =====================
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
while the number was configured when the file and the folder for video on the flash drive, 31.12.2013,
Engines strongly warming, the camera works, I can see on the android.
And the last time when I was working, I left it on the ground, for discharge battery, so it is still recorded 15 minutes (6 %), and then I put it in the case, but without holder for the camera.
Help me please.
Hello,
Have you tried a gimbal calibration. from the general settings menu, go to gimbal settings, then Gimbal auto calibration. Try that and see what happens.
Also, can you try the latest firmware update for your P3 Pro just to see if it cures it. Update the aircraft first then the RC.
You can try 1.7 first if you like, or 1.8.
let me know if it still acts like that and if so I will have someone email you from the repair center to have it sent in for repair.