Please select Into the mobile phone version | Continue to access the computer ver.
Inspire 1 Raw (X5R) Swap with X3
626 3 2016-6-8
Uploading and Loding Picture ...(0/1)
o(^-^)o
aididhaiqal
lvl.3
Flight distance : 1132822 ft
Malaysia
Offline

Hello,So im about to buy an Inspire 1 Raw but i need X3 too (Sometime i need X3 because flight time).So does it possible if the moment i want X3,I just swap with X5R without needing to change firmware?
2016-6-8
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

You won't need to apply firmware everytime you switch between cameras, but you want to keep both up to date. Whenever you perform updates for the unit/cameras, here's what you would do:

When updating the Inspire w/ Raw, you'll use the Inspire 1 RAW firmware.
When updating the Inspire w/ X3, you'll use the Inspire 1/V2 firmware.

If you update the Raw prior to the X3, it will not reapply any firmware to the aircraft itself (the craft uses the same firmware) the firmware would only be applied to the X3
2016-6-17
Use props
Rinzler
lvl.4

United States
Offline

Jamie, can he also say swap cameras with out power cycling? Just wondering for my own interest.
2016-6-17
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Rinzler Posted at 2016-6-18 04:20
Jamie, can he also say swap cameras with out power cycling? Just wondering for my own interest.

You would not want to do that, as it can cause communication issues. You will want to turn off the unit prior to replacing the camera, so that the aircraft can properly recognize the camera at start up.
2016-6-17
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules