Has anyone experimented with what settings is best for keeping the fpv-feed seamless with range in mind? Seen some posts about fpv dropouts without any further suggestions, so thought this would be nice to settleThanks
I have a p3p so I can get more range but what works best for me is to do this then go into manual mode select the lowest bit rate and channel 1-4 because they are not in the same frequency range used by cell phones. also fly as high as possible if you are 1km away flying at 120m the signal has to go 1007m compared to 1001m at an altitude of 60m a difference of 6m is insignificant and at 120m you will have less trees and houses for the signal to penetrate.