Hi everyone,

I've seen a lot of threads about sd cards not working on Phantom 3 Standard and, I would like to know if there is any solution with this issue.

I just bought a 64GB SDXC CLASS 10 (U1 I) card and it works fine on my mbpro but it's not working on my P3S.

I've read multiple ways to try to make it work, but keeps throwing the SD CARD INVALID message, even formatting with a 3rd party software to FAT or exFAT. It won't let me format with the DJIGo app. The card is not damaged at all. Should I replace it with a SDHC card? Is there a way to make it work?

Thanks in advance.

You can try an SDHC, I would just use a 32GB card.

Thanks Ken. I will try with a SDHC, then.

SDXC are not supported at all? I thought the P3S supports card up to 64GB.

javirocha Posted at 2016-8-10 02:34
Thanks Ken. I will try with a SDHC, then.

SDXC are not supported at all? I thought the P3S supports ...

Can you try a 64 SDHC and see if it works. I just know a 32GB card works just fine.

javirocha Posted at 2016-8-9 10:34
Thanks Ken. I will try with a SDHC, then.

SDXC are not supported at all? I thought the P3S supports ...

I have used a SanDisk Ultra 64 GB card on both my P3P's - work fine.

WetDog, I've seen many people made it work on P3P since it needs higher data transfer for 4K video. I'm still wondering if I can make it work on my P3S, for 1080p or 2.7K video.

javirocha Posted at 2016-8-10 08:28
WetDog, I've seen many people made it work on P3P since it needs higher data transfer for 4K video.  ...

You could save yourself a lot of pain and anguish by just buying a 32GB Sandisk Extreme card or a Sandisk Extreme Pro. They are known to work properly.

Thanks Geebax, it looks the right way to do it.