I haven't seen another thread addressing this besides a couple comments.
Has anyone who had spinning or RTH issues, or any other issues, updated to the latest firmware and seen that it helped or fixed their issues ?
Would love to see some feedback for people with issues on the latest firmware, what your issue was/is and if the update helped.

Bump. I'm interested too.

So far not. But better to wait for more time. I only flied 40 min after upgrade the firmware.

FreezeSun Posted at 2016-11-10 10:21
So far not. But better to wait for more time. I only flied 40 min after upgrade the firmware.

Do you mean that you've flown for 40 minutes post upgrade and your problem persists, or you've only flown 40 minutes, so don't feel confident that you have verified that your problem is fixed?

qMvQTfjUrm4z Posted at 2016-11-11 02:24
Do you mean that you've flown for 40 minutes post upgrade and your problem persists, or you've onl ...

I haven't met the issue after upgrade.

Overall the issue doesn't happen very often, e.g. in my last 4 hours of fly with Mavic, the issue happened three times. So I can't say the issue is totally gone or not yet.

I'll keep an eye on this thread.

warrior200 Posted at 2016-11-10 11:56
I'll keep an eye on this thread.

Much appreciated warrior.  Will you let us all know when you find out something?

FreezeSun Posted at 2016-11-10 19:25
I haven't met the issue after upgrade.

Overall the issue doesn't happen very often, e.g. in my l ...

What issues?

DRONE-flies-YOU Posted at 2016-11-10 20:09
Much appreciated warrior.  Will you let us all know when you find out something?

I've flown through two batteries since update. Haven't had any issues since and I did utilize active track. Keeping fingers crossed that this resolved it. Not sure if I should keep posting all good from here on out if nothing arises. Not disappearing from forum, but if there's nothing to write about I'll be

I take it that no news is good news.

i still have an issue, the issue is not having a date of when my mavic will arrive!!! LoL

no news is good news, people too happy to come back and post...

Yes my main issues seem to be solved. Soon after I updated, my extra batteries shipped! I'll keep everyone updated when they arrive.

On a more serious note.  The android application shows "Battery Error" in flight logs even though the mavic is NOT powered on.  However, there were no Battery Error messages shown during flight.

DRONE-flies-YOU Posted at 2016-11-11 04:09
Much appreciated warrior.  Will you let us all know when you find out something?

upgraded the latest firmware, RTH issue, I push it, it didn't came back, I have to manually land it myself.

ANCW Posted at 2016-11-11 06:15
upgraded the latest firmware, RTH issue, I push it, it didn't came back, I have to manually land it  ...

Can you show logs? and/or replay the video and record it?

Did it fly back to the coordinate but didn't land?

I tested latest FW yesterday and everything seemed to work as it should. RTH worked and remote calibration does not have the "display glitch" where the left stick sometimes would get "stuck".

I will probably try to fly indoors tonight since that was the only place where I've had any issues (unresponsive right stick + drifting to the left into a wall).

Pierre35 Posted at 2016-11-11 15:52
Did it fly back to the coordinate but didn't land?

On the new firmware, at night, RTH would trigger and will go and hover abive the home point but it wouldn't land. I had no issues with the previous firmware.

RTH in daytime works perfect.

ANCW Posted at 2016-11-11 13:15
upgraded the latest firmware, RTH issue, I push it, it didn't came back, I have to manually land it  ...

Where you flying your Mavic in low light condition (night or before sunrise)?

I the spinning happen to me today. Never happened before, had drone a week with no issues. After 5 mins started to circle, then stopped responding to inputs completely. Luckily return to home brought it back but even when resending it was spinning.

If you have issues, please read the requirements and post here:

http://forum.dji.com/forum.php?m ... mp;extra=#pid561636

92SdfzoL6Km3 Posted at 2016-11-11 06:40
I the spinning happen to me today. Never happened before, had drone a week with no issues. After 5 m ...

Had you updated to the latest firmware?