How can I completely factory reset the drone and the remote controller, because I'm getting a main controller data error when flying, also their is an error with the imu. How can reset everything??

You need to calibrate the IMU! This might fix all the errors.

What about the data recorder error? @mjlstudios

First calibrate the IMU. Then check and see if you still have the recorder error.

I've responded to you on your duplicate thread. Please keep in mind that you should keep one thread per subject, so that assistance is not duplicated or other answers are lost.

hi guys i hope someone can help me i got me a phantom 3 standerd  so im stupid with this thing . if you are in the air with the phantom  how do you move your camera up or down left and right  my app what i have is DJI GO APP  HOPE SOME CAN HELP ME THANK YOU

herselman Posted at 2016-11-28 09:08
hi guys i hope someone can help me i got me a phantom 3 standerd  so im stupid with this thing . if  ...

Your controller/remote has a dial on the left side. Turn it to move camera up/down. To move camera right/left, use the left controller stick to turn the drone. You cant turn the camera left/right without turning the drone.

Bourgeois Posted at 2016-11-28 15:48
Your controller/remote has a dial on the left side. Turn it to move camera up/down. To move camera ...

well said, but do it SLOWLY   :-)

Bourgeois Posted at 2016-11-28 08:48
Your controller/remote has a dial on the left side. Turn it to move camera up/down. To move camera ...

THANK YOU ILL TRY IT THANK YOU GUYS

herselman Posted at 2016-11-28 11:17
THANK YOU ILL TRY IT THANK YOU GUYS

You can adjust the speed that camera goes up/down also, If you haven't already print out a copy of the manual.
Having a printed copy in front of me, I find so much more useful  info that I missed just reading on screen