Hi

I have my P4P and i am trying to configure the video settings and in PAL i only have 24/25fps in 4K 3840x2160.

I have checked NTSC/PAL & H264/H265

1920x1080 is giving me 24/25/48/50/120fps

You may want to double check the P4P spec.  I did not find that video mode in the spec sheet.

You need to put it into both H.264 mode and then NTSC mode. DJI do say it will do 60 fps in that configuration.

Geebax Posted at 2016-12-2 13:43
You need to put it into both H.264 mode and then NTSC mode. DJI do say it will do 60 fps in that con ...

NTSC (Not The Same Colour), but not in PAL?

Punchbuggy Posted at 2016-12-2 13:56
NTSC (Not The Same Colour), but not in PAL?

(Not Twice The Same Colour)

Yes, 60 fps is related to the US mains frequency, and DJI continue to relate it to NTSC when none of the video produced by their cameras have anything to do with the NTSC television standards. NTSC only applies to standard definition analog broadcasts.

Geebax Posted at 2016-12-2 14:32
(Not Twice The Same Colour)

Yes, 60 fps is related to the US mains frequency, and DJI continue to ...

Well, That's just dumb... ;-) I have to set it to the U.S. standard broadcast standard to get the higher frame rate. Hmm... OK. Thanks Geebax.