I noticed weird behaviour - after I take a picture the frame is moved a little bit. As if mechanical shutter introduced some vibrations. It is impossible to take two identically framed pictures one after another. And I'm not flying - P4Pro is standing on my desk, so no wind, no other movement etc.

But it does not occur when taking AEB pictures - all are perfectly aligned then.

Anybody noticed that as well? Any solutions?

The mechanical shutter will introduce some mini vibrations, but it has no negative influence on the performance of camera and photo taken.

Are you getting motion blur caused by the shutter action? It would be interesting at what shutter speed this starts to occur at.

DrawsWithLight. Posted at 2016-12-6 09:52
Are you getting motion blur caused by the shutter action? It would be interesting at what shutter speed this starts to occur at.

the photos themselves - in terms of quality - are ok, but the thing is that each next photo I take is shifted a bit comparing to previous one. Sometimes frame goes up a bit, sometimes to the side, sometimes it rotates a little. It is impossible to take two pictures one after another so they are identical - even with my drone standing still on my desk...

LitlBitl Posted at 2016-12-6 10:20
the photos themselves - in terms of quality - are ok, but the thing is that each next photo I take is shifted a bit comparing to previous one. Sometimes frame goes up a bit, sometimes to the side, sometimes it rotates a little. It is impossible to take two pictures one after another so they are identical - even with my drone standing still on my desk...

Is the shift in image due to movement of the gimbal, despite the drone being on a solid surface?

DrawsWithLight. Posted at 2016-12-6 12:23
Is the shift in image due to movement of the gimbal, despite the drone being on a solid surface?

Yes, exactly.

DrawsWithLight. Posted at 2016-12-6 03:23
Is the shift in image due to movement of the gimbal, despite the drone being on a solid surface?

Yes I noticed this also with the Gimbal moving so slightly with the P4P sitting on my desk.  I also noticed the DIST keeps moving up from 0 feet to 12ft when sitting on my desk ....?

MHM1170 Posted at 2016-12-7 16:09
Yes I noticed this also with the Gimbal moving so slightly with the P4P sitting on my desk.  I also noticed the DIST keeps moving up from 0 feet to 12ft when sitting on my desk ....?

https://drive.google.com/file/d/ ... FU/view?usp=sharing

LitlBitl Posted at 2016-12-7 12:23
Yes, exactly.

It seems there are more people experiencing this over on the Facebook page!