Please select Into the mobile phone version | Continue to access the computer ver.
Samsung S2 settings?
2194 30 2017-1-14
Uploading and Loding Picture ...(0/1)
o(^-^)o
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

Debugging on or off? Any other settings to make this tab work correctly?Samsung sm-t713. Ive read the older version worked great the new version not so much.
2017-1-14
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Hello Gmman, please enable the debugging.  Besides, could you please clarify what's the issue with your tab?
2017-1-15
Use props
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

Keeps flashing the opening screen before the app opens never opens the app. and when you open the app ahead of time it does not connect to the Mavic.  The only way to get it to work is have the tablet completely powered off and have the RC and Mavic on before turning on the tablet. Then it will connect the tab to the RC.
2017-1-15
Use props
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

Not in English but this is what it does.
2017-1-15
Use props
Bobaloo
lvl.2
Flight distance : 42051 ft
United States
Offline

I would also like to know.
2017-1-15
Use props
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

I kinda think DJI focuses on Apple much more than android.... This Tablet is awesome once I get it to connect. No video latency!  Super picture. Fits into the controller.
2017-1-15
Use props
Bobaloo
lvl.2
Flight distance : 42051 ft
United States
Offline

Have you used it successfully for flight?  I assume you powered on the S2 after the MC and after the drone?
2017-1-15
Use props
rapcon
lvl.2
Flight distance : 1296 ft
United States
Offline

I have this same issue and you are correct the only way to get it to work is to power completely down and start the app with the controller already connected to the Mavic.
2017-1-15
Use props
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

Bobaloo Posted at 2017-1-15 16:08
Have you used it successfully for flight?  I assume you powered on the S2 after the MC and after the drone?

Yes I have had a few flights with it. No video delay, no app crash, no freeze ups. If the connect issue could be resolved it would be a great tablet for my Mavic!
2017-1-15
Use props
Mavicator
lvl.4
Flight distance : 129583 ft
United States
Offline

I have the S2 T710 and it has worked flawlessly.  I have heard of others with the 713 having this problem.  They resolved it by doing a factory reset.
2017-1-15
Use props
Doots
lvl.4
Flight distance : 682598 ft
United States
Offline

Here's my S2, 9.7 inch (model SM-T813) flaking when I try to connect it to the controller too. Looks like the USB is constantly switching between Charging and MTP mode.

2017-1-15
Use props
CuaC
First Officer
Flight distance : 369626 ft
Germany
Offline

What is the Android version on your tablet? The reboot happens on Samsung devices when they found a critical error, which is probably caused by that connection crazyness. Have you tried to cleanup the usb port? Could it be a misscontact? Have you tried another cable? Does the cable go fully into the socket, or stands out (metal side) quite a lot?
2017-1-16
Use props
Doots
lvl.4
Flight distance : 682598 ft
United States
Offline

From what I've been able to glean from the Internet, it seems samsung tablets models that end with "13" are the one that aren't working right. Mine won't even connect with the work-around some have been able to use where they power on the tablet AFTER the remote and mavic is already connected.
2017-1-16
Use props
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

CuaC Posted at 2017-1-16 00:39
What is the Android version on your tablet? The reboot happens on Samsung devices when they found a critical error, which is probably caused by that connection crazyness. Have you tried to cleanup the usb port? Could it be a misscontact? Have you tried another cable? Does the cable go fully into the socket, or stands out (metal side) quite a lot?

Its a brand new tablet purchased specifically for this purpose. Brand new cables tried several. It is a software issue...
2017-1-16
Use props
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

Doots Posted at 2017-1-16 01:13
From what I've been able to glean from the Internet, it seems samsung tablets models that end with "13" are the one that aren't working right. Mine won't even connect with the work-around some have been able to use where they power on the tablet AFTER the remote and mavic is already connected.

Try this Doots.

Craft off
controller off
S2 Off-Important
Plug in USB to S2 while off
Start controller
Start Craft
Turn on S2
Connected!
2017-1-16
Use props
Doots
lvl.4
Flight distance : 682598 ft
United States
Offline

Gmman Posted at 2017-1-16 15:59
Try this Doots.

Craft off

Tried that a few times.That work-around doesn't work for me.
2017-1-16
Use props
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

Doots Posted at 2017-1-16 19:34
Tried that a few times.That work-around doesn't work for me.

Have you gone into developer mode for USB debugging?
2017-1-16
Use props
Doots
lvl.4
Flight distance : 682598 ft
United States
Offline

Gmman Posted at 2017-1-16 19:38
Have you gone into developer mode for USB debugging?

Yes I do have developer mode activated on the tablet and usb debugging turned on.
2017-1-17
Use props
Rich32
lvl.1
Flight distance : 4951 ft
United States
Offline

Gmman Posted at 2017-1-16 19:38
Have you gone into developer mode for USB debugging?

I have not flown yet with sm-t713, however it does connect with a reboot.  I have not gone to developers mode.  Is there a reason I should activate usb debugging before flying?
2017-1-21
Use props
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

Rich32 Posted at 2017-1-21 12:25
I have not flown yet with sm-t713, however it does connect with a reboot.  I have not gone to developers mode.  Is there a reason I should activate usb debugging before flying?

If it works without changing it leave it alone. I really hope they resolve the issue with this tablet. It is very nice to fly with...
2017-1-21
Use props
garrepa2
lvl.1
Flight distance : 43612 ft
United States
Offline

I have a Samsung Tab 2 SM-T813 running android 6.0.1 and I couldn't get it to connect  Then I  saw this thread. Also found that powering off the tablet, then starting the drone and controller, waiting for them to get ready , then powering on the tablet has worked every time so far.
2017-4-17
Use props
Roll Tide
lvl.3
Flight distance : 610502 ft
United States
Offline

I have used my Samsung Tab S2 for over a year with my P3S, no problems at all.
2017-4-17
Use props
garrepa2
lvl.1
Flight distance : 43612 ft
United States
Offline

I have the SM-T813 and couldn't get it to connect until I tried the following. 1) power off the tablet, 2) power up the controller and the Mavic, Plug the recharge cable into the front USB on the controller and the other end into the tablet 5) power on the tablet and immediately enter your password if one is required.  
2017-4-17
Use props
garrepa2
lvl.1
Flight distance : 43612 ft
United States
Offline

Hopefully you will connect and in my case everything works great! I don't think debugging matters but my is IN debugging mode.
2017-4-17
Use props
fans4c24aa26
lvl.1

United States
Offline

I had close to the same problem with my galaxy tab e and i found that if i change usb configuration to RNDIS in developer options the problem went away. You just have to switch it to that every time right before connecting the controller...hope this helps
2017-4-24
Use props
fansc36c9eff
New

United States
Offline

I just got my Samsung S2 9.7 and I'm also having connectivity issues. I have the T-818v from Verizon. I got this tab because it gives me data as well. I went into the developer mode and turned on debug and RNDIS, but that didn't help me. I was able to do the restart steps, but now that doesn't work. Anyone got any ideas?
2017-4-30
Use props
Gmman
Second Officer
Flight distance : 1003150 ft
United States
Offline

fansc36c9eff Posted at 2017-4-30 18:50
I just got my Samsung S2 9.7 and I'm also having connectivity issues. I have the T-818v from Verizon. I got this tab because it gives me data as well. I went into the developer mode and turned on debug and RNDIS, but that didn't help me. I was able to do the restart steps, but now that doesn't work. Anyone got any ideas?

Did you turn the tablet completely off then turn on the remote and mavic? Seems to work for most.
Sorry if it doesnt no more suggestions.
2017-4-30
Use props
Cagueca
lvl.1
Flight distance : 54147 ft
Switzerland
Offline

Mine s2 T813 does this ...

Please Dji add suport for this tablet

2017-4-30
Use props
Jenkins
lvl.4
Flight distance : 10814 ft
United Kingdom
Offline

It is annoying but worth the hassle to be able to use the excellent screen. I already have my tab off. I connect the cables. Turn on remote. Turn on tab. Put remote down and then get the mavic ready. Doesn't actually take any more time that way.
2017-5-1
Use props
fansc36c9eff
New

United States
Offline

Gmman Posted at 2017-4-30 19:03
Did you turn the tablet completely off then turn on the remote and mavic? Seems to work for most.
Sorry if it doesnt no more suggestions.

I tried it again today and after 3 tries I was finally able to connect. It is just frustrating to have jump through all of these hoops to fly
2017-5-1
Use props
Cagueca
lvl.1
Flight distance : 54147 ft
Switzerland
Offline

garrepa2 Posted at 2017-4-17 18:28
I have the SM-T813 and couldn't get it to connect until I tried the following. 1) power off the tablet, 2) power up the controller and the Mavic, Plug the recharge cable into the front USB on the controller and the other end into the tablet 5) power on the tablet and immediately enter your password if one is required.

After 3 times it worked
2017-5-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules