Hello guys I'm new to the forum.

This morning I took my P3S for a flight which was fine.
I then went for a flight this evening ( different location )
Re calibrated drone, took it up to approx 50ft and I loose all signal on the app. I then come back to approx 20ft and will all come back again.

I am using iPhone 7 plus so not sure if this is okay? But baring mind it was ok this mornings flight.

I have updated to latest firmware and I'm reading to downgrade the firmware to previous Version but I'm not sure if this is the best thing to do :/

Hope you can advise me

Ps nice to meet you guys!

Daz

Or is this the same issue as what everyone is saying regarding the update?

Please make sure you adjust the antenna to the optimal range during flight.
And try to fly it farther firstly, then higher.
Besides, you can re-link aircraft and remote as well.

Hi thanks for that, however I have the antenna pointing up. (This is all I know) regarding when u say I can re link ac to Rc what do u mean by this.
Thanks again

Here is what he means by relinking the controller, http://wiki.dji.com/en/index.php ... l-Remote_Controller . This should provide all the necessary information on relinking the controller.  If relinking the controller doesn't work my next step would be possibly downgrading the FW.  I had the same issue that you described after I updated my FW. I am now using 1.7.9 and all seems fine again.

Good luck!

Cory

Thank you Cory much appreciated!

Cory I have a 3 Standard will this be the same process?

Darrel1987 Posted at 2017-2-6 11:15
Cory I have a 3 Standard will this be the same process?

yes the procedure is the same!

DroneGuy96 Posted at 2017-2-18 13:35
yes the procedure is the same!

How ? i do the things they say and all i see is "No available firmware for downgrade"    version 1.8.10   Sorry is this for the RC?