Please select Into the mobile phone version | Continue to access the computer ver.
No Image Tranmission after update - Please help P3P
674 7 2017-3-22
Uploading and Loding Picture ...(0/1)
o(^-^)o
x7judy
lvl.1

United States
Offline

Hey guys my drone was working fine until i updated my phantom 3 pro and remote.

The picture comes on when im litterally 5 ft from it. Any further and i lose signal - any clue whats going on here? very frustating as  i have a few shoots coming this weekend.

Phantom 3 pro
Version: 1.10.90
Remote: 1.8.0

how can i fix this?

any help would be much appreciated!

2017-3-22
Use props
#shotxclvck
Second Officer
Flight distance : 3423297 ft
United States
Offline

just exit out and go back in....you will be fine!
2017-3-22
Use props
x7judy
lvl.1

United States
Offline

sounds good but not the solution haha ive been trying to fix this for over 3 days now with no luck. Im stuck on what to do
2017-3-22
Use props
x7judy
lvl.1

United States
Offline

anyone with some ideas on how i can figure out the issue?
2017-3-22
Use props
iMeMoz
lvl.2
Flight distance : 298720 ft
Finland
Offline

Do you have HDMI module? It is reported to cause some problems. You can also try to downgrade your remote controller. Power on RC, connect it to your mobile device, in DJI GO app press small icon on top right for few seconds/or so long that downgrade menu pop-ups. Then select later RC version and start downgrading, it can take 15 minutes.
2017-3-22
Use props
vr-pilot
Second Officer
Flight distance : 4304885 ft
Germany
Offline

x7judy Posted at 2017-3-22 09:38
sounds good but not the solution haha ive been trying to fix this for over 3 days now with no luck. Im stuck on what to do

You are not alone...
http://forum.dji.com/forum.php?m ... &fromuid=127639
http://forum.dji.com/forum.php?m ... &fromuid=127639

3 (THREE!) actual post in a row.

DJI, WAKE UP!!!!!!!!!
2017-3-22
Use props
x7judy
lvl.1

United States
Offline

iMeMoz Posted at 2017-3-22 12:09
Do you have HDMI module? It is reported to cause some problems. You can also try to downgrade your remote controller. Power on RC, connect it to your mobile device, in DJI GO app press small icon on top right for few seconds/or so long that downgrade menu pop-ups. Then select later RC version and start downgrading, it can take 15 minutes.

ill give that a try thanks!
2017-3-22
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Try the following button combinations to see if it helps:

Reset the RC of presets:
* Turn on the controller, and the aircraft should be off.
* Press C1, C2, and shutter on the controller then turn the controller off.
* Turn on both the aircraft and the controller and link the remote.

Manually relink the RC:
* Turn on both the aircraft and the controller.
* Press C1, C2, and the record button on the controller, then the controller will beep like D-DD.
*While keeping them pressed, press the wheel on the right side of the controller (ISO) and then the first light of the controller will become blue and it will constantly beep DDDD.
* Use a pen to click the linking button on the aircraft and hold for 3-5 seconds, and then take the pen off the aircraft and wait, it will be linked soon.

Worse case, try downgrading the RC to see if there is any change.
2017-3-22
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules