Hi boys and girls,

Does anyone know, if unscrewing knobs on controler is the only way to get slower rudder speed?

ty

Go to "Main Controller Settings" then to "Advanced Settings", then to "Sensitivity" and reduce the "Yaw Movement Limit". That's it!

kykphantom Posted at 2017-4-26 02:42
Go to "Main Controller Settings" then to "Advanced Settings", then to "Sensitivity" and reduce the "Yaw Movement Limit". That's it!

thank you for your tip

Also: You can get overall much slower and smoother results when flying in "Tripod" mode.

kykphantom Posted at 2017-4-26 02:42
Go to "Main Controller Settings" then to "Advanced Settings", then to "Sensitivity" and reduce the "Yaw Movement Limit". That's it!

I did not find sesitivity in main control settings...but I found "Gain & expo Tuning" also in main control settings under advanced settings and I set rudder L/R on 0.30 that is 0.10 lower than original in normal flight mode (in sport mode rudder L/R is set on 0.50). Do you thik that will work?

Eric13 Posted at 2017-4-26 09:43
Also: You can get overall much slower and smoother results when flying in "Tripod" mode.

Thank you will try that

I found this to be a good source for understanding the different settings.
It is for a Mavic, but applies equally to the Phantom.

Struzzinho Posted at 2017-4-26 09:38
thank you for your tip

Please let us know if the suggestions provided worked well for you.

rparge Posted at 2017-4-26 13:48
I found this to be a good source for understanding the different settings.
It is for a Mavic, but applies equally to the Phantom.
https://www.youtube.com/watch?v=iYNcTHF8B3w

It was very usefull cheers