After the last update I'm getting continuoiusly false positives in P.mode during high speed flying

Is it normal?

I wonder if a calibration of VPS in DJI Assistant 2 would help ?

You may well get false reports if you're flying towards the Sun, lens reflections can confuse the system sometimes.

Aardvark Posted at 12-2 09:09
I wonder if a calibration of VPS in DJI Assistant 2 would help ?

You may well get false reports if you're flying towards the Sun, lens reflections can confuse the system sometimes.

there was no sun when i was flying

fanse3719782 Posted at 12-2 09:27
there was no sun when i was flying

Try the calibration and see if that makes any difference. You could also check sensors are free of any dust or grit.

Aardvark Posted at 12-2 09:36
Try the calibration and see if that makes any difference. You could also check sensors are free of any dust or grit.

the calibration stucks at the calculation page, after the calibration of the side cams

fanse3719782 Posted at 12-2 09:55
the calibration stucks at the calculation page, after the calibration of the side cams

Are you using latest version of DJI Assistant 2 from Here

Hello and good day. I am sorry to know that you are having issues with your DJI Mavic 2 Pro. This is not the experience we want you to have with DJI. Can you please check if the drone's firmware is updated. I will be posting the link where you can find the most recent firmware for the DJI Mavic 2 Pro https://www.dji.com/mavic-2/info#downloads. After this process please calibrate the vision sensors of the DJI Mavic 2 Pro and see if the issue will be fixed. I will be posting an official DJI Tutorial Video on how to calibrate the vision sensors of the DJI Mavic 2 Pro properly. Thank you.