Please select Into the mobile phone version | Continue to access the computer ver.
Ronin-S drifting issues and wanted features by mistake
417 11 1-9 10:55
Uploading and Loding Picture ...(0/1)
o(^-^)o
TishDirector
lvl.2
  • >>>
United States
Offline

So like some of you I'm also having drifting issues where upon turning on the gimbal it descides to tilt down. I've done all the calibrations  in the app / joystic tap button 4 times. It solves the issue untill you reboot it and then it does it again.

To bypass this since the job was to follow the subject / no panning invovled etc.. I went into the app and disabled the joystic Up and Down channels that controls the tilts. That fixed the issue or rather bypassed and was able to do the job. That setting was saved to M1... If I switched to M2 then the settings go to its standards and Up and down on the joystick is re-enabled, which brings me to an idea.

Not sure if other gimbals do this but upon experimenting I felt it was rather cool that the gimbal just drifted down while I was moving up to give to give the shot some kind of reveal effect whitout having to press on the joystic.

Wouldnt it be cool to have automated tilt / panning movings where all you have to do is move the gimbal physically and not have to press on the joystic to get the effect you want.

I also was wondering can the focus wheel be assigned to joystic movements maybe tilts / rolls /pans etc.. I think that would be cool. I think we can all agree the zooming on the wheel is kinda useless since its either too fast or too slow.

I just my ramblings let me know what you think....  Thank you all for reading.
1-9 10:55
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Hi TishDirector, sorry for the drifting issue, may I verify the following info?
1. Was the gimbal balanced properly before powering on? Does the issue persist after Auto Tune? If you have changed any settings, please restore the gimbal to the default via the APP.
2. If there is no luck, could you please share us the screenshot of the Parameter Settings in the APP when the gimbal is centered? Please press 'More' and show us the whole settings especially the Stiffness and the joint angle and the Smooth Track settings as well.

If you would to physically move the gimbal, please close the SmoothTrack.
The Focus wheel is used to control the focus or the zoom, it cannot be assigned to joystick movements, thanks for your understanding.
1-11 03:28
Use props
TishDirector
lvl.2
  • >>>
United States
Offline

DJI Mindy Posted at 1-11 03:28
Hi TishDirector, sorry for the drifting issue, may I verify the following info?
1. Was the gimbal balanced properly before powering on? Does the issue persist after Auto Tune? If you have changed any settings, please restore the gimbal to the default via the APP.
2. If there is no luck, could you please share us the screenshot of the Parameter Settings in the APP when the gimbal is centered? Please press 'More' and show us the whole settings especially the Stiffness and the joint angle and the Smooth Track settings as well.

hello @DJI Mindy thank you for your response - Ive tried everything yes the gimbal was balanced before I tried.

Joystick calibrations work until I turn it off an back on.
1-11 11:20
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

TishDirector Posted at 1-11 11:20
hello @DJI Mindy thank you for your response - Ive tried everything yes the gimbal was balanced before I tried.

Joystick calibrations work until I turn it off an back on.

Could you please share us the screenshot of the Parameter Settings in the APP when the gimbal is centered? Please press 'More' and show us the whole settings especially the Stiffness and the joint angle and the Smooth Track settings as well. Thank you in advance.
1-13 23:25
Use props
Nikolaichik.pho
lvl.1
Belarus
Offline

DJI Mindy Posted at 1-13 23:25
Could you please share us the screenshot of the Parameter Settings in the APP when the gimbal is centered? Please press 'More' and show us the whole settings especially the Stiffness and the joint angle and the Smooth Track settings as well. Thank you in advance.

Hi!
I have the same problem. Previously gimbal works fine may more then 7 month, but at some moment start drifting. May be this issue can start after last firmware update (update was done without any errors). Also i was tried downgrade firmware, but it doesn't help.
First time turning off joystick helps me, but after power off and power on again issue start again.
Then i was read about joystick calibration and few times it help me until I turn off gimbal and turn on again.
Now nothing helps me - reseting gimbal, turning off and turning on joystick in app, joystick calibration, system calibration...
Also sometimes movement of gimbal is now smooth. Today i was tried control gimbal by joystick in app and it's not smooth - it's moving by shaky steps.

In attached photos:
Calibration is Excellent


Motor parameters


Control settings. Here you can see that joystick do something, but i don't touch it it.


Here is firmware info and battery status



Here is after joystick calibration



And finally after advanced system calibration
3-4 11:25
Use props
fans1022a4b6
New

Offline

Not sure if this will help but check out this drift fix...
youtu.be/hpP1vo3IKrc
3-5 15:24
Use props
Nikolaichik.pho
lvl.1
Belarus
Offline

fans1022a4b6 Posted at 3-5 15:24
Not sure if this will help but check out this drift fix...
youtu.be/hpP1vo3IKrc

it helps sometime, but after some time it can start again. I tried this before and it help for 1-2 days. Now it helped and i will check how long it will be work fine.
Biggest problem that it can start at shooting time
3-6 07:12
Use props
Mikex
lvl.4
Italy
Offline

I have the same issue, and DJI asks me to send my gimbal to repair...
3-6 07:25
Use props
Mikex
lvl.4
Italy
Offline

you can try to do joystick calibration and then pull of battery without powering off gimbal, for me it works for a some time...
3-6 07:32
Use props
Nikolaichik.pho
lvl.1
Belarus
Offline

fans1022a4b6 Posted at 3-5 15:24
Not sure if this will help but check out this drift fix...
youtu.be/hpP1vo3IKrc

few hours later i turn on gimbal and drifting start again
3-6 12:33
Use props
Nikolaichik.pho
lvl.1
Belarus
Offline

Mikex Posted at 3-6 07:25
I have the same issue, and DJI asks me to send my gimbal to repair...

I asked store where i bought my gimbal and they said the same. But problem is that store located in different country and i must bring them my gimbal. That's difficult and expensive This reason i'm searching fix gimbal by myself
3-6 12:36
Use props
Mikex
lvl.4
Italy
Offline

Nikolaichik.pho Posted at 3-6 12:36
I asked store where i bought my gimbal and they said the same. But problem is that store located in different country and i must bring them my gimbal. That's difficult and expensive This reason i'm searching fix gimbal by myself

absolutely the same  issue, so I guess DJI will just ignore this issue
3-6 23:38
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules