I just bought an RS 3 Pro today, and have had nothing but issues so far...

No matter what I do, I cannot update the firmware. I keep getting the 1003 error code.
The battery is draining rather quickly, and the roll motor is getting rather hot (with nothing mounted).
The firmware version listed on the gimbal, is "00.02.02.00" which doesn't match any of the versions I've seen online.
The app reports that the firmware version is "N/A".
When I turn off the gimbal, the arms do not lock flushly.

I'd appreciate any help.

Hello, there. Sorry for the inconvenience. Would you please follow the troubleshooting steps below?
1. Ensure that the Ronin app has been upgraded to the latest version.
Here is the link: https://www.dji.com/ch/downloads/djiapp/dji-ronin
2. If possible, use another mobile device to refresh the firmware (degrade and then upgrade the firmware).
Android - iOS

DJI Wanda Posted at 5-7 05:50
Hello, there. Sorry for the inconvenience. Would you please follow the troubleshooting steps below?
1. Ensure that the Ronin app has been upgraded to the latest version.
Here is the link: https://www.dji.com/ch/downloads/djiapp/dji-ronin

I've got the latest version of the app on my iPhone. I do not have an android phone.

Is the gimbal connecting to your phone? If so you can click the three lines in top left corner, go to firmware, hold down the version number or N/A for 5-6 seconds. You should be able to download older firmware. You may be on beta version of firmware. The RS3 Pro doesn’t lock flush because with a heavy load could hit the bottom arm.

Blips Posted at 5-7 08:59
I've got the latest version of the app on my iPhone. I do not have an android phone.

Sorry for the late response. Will you be able to borrow a phone to do that?

Flyin Ryan 406 Posted at 5-13 01:18
Is the gimbal connecting to your phone? If so you can click the three lines in top left corner, go to firmware, hold down the version number or N/A for 5-6 seconds. You should be able to download older firmware. You may be on beta version of firmware. The RS3 Pro doesn’t lock flush because with a heavy load could hit the bottom arm.

Yes it was connected. No, using the downgrade option also failed.

I simply returned the the RS3 Pro to the store.

No proper android support. Locking hardware behind internet activation. Limiting firmware updates through a phone. Poor customer support.

I cannot update my firmware either. Motors of my gimbal isnt working at all.

Hi Team,
I cannot use my RS3 pro, It turns on and LCD shows the icons but the motors don't turn on. I am trying to update the firmware by connecting my iPhone which is failing and giving error 1003.

Hello. I just updated the firmware for Ronin RS3 pro. After the upgrade is complete, the screen on Ronin will appear blue like the picture. Hope the helping. Thank

I have a focus motor problem not moving with either dial or focus wheel with the same firmware version. How do you downgrade? In all previous support responses I have seen admins refer to a "list on the upper left corner in the app" but as we see from your screenshots of the Ronin app there is no such list.

Thanh Duong Posted at 2023-11-4 05:16
Hello. I just updated the firmware for Ronin RS3 pro. After the upgrade is complete, the screen on Ronin will appear blue like the picture. Hope the helping. Thank

I have the same problem and I tried all the methods mentioned and it didn't work

Bilal Ismat Posted at 2023-9-18 11:51
Hi Team,
I cannot use my RS3 pro, It turns on and LCD shows the icons but the motors don't turn on. I am trying to update the firmware by connecting my iPhone which is failing and giving error 1003.

o meu esta a mesma coisa, voce conseguiu resolver?

Hello, I’m having trouble with the ronin rs3 pro, I can turn the power on but then it doesn’t respond to the controls, if I want to auto lock or move the gimbal with the wheel it’s not responding, I tried updated the firmaware and it’s giving me the same -1003 error, help please! It was working fine and then suddenly it didn’t…